GATES BX38
|
|
$12.96
Precio
|
$0.00
Depósito
|
+ Vendido en Paquetes de 1x1
Empacar
|
$12.96
Total
|
|
|
|
Especificaciones de GATES BX38 |
---|
Material de Correa | EPDM | Construcción | Muescado | Cable Material | Poliéster | Sección Transversal Designación | BX | Muescado | Sí | Número de Filamentos | 1 | Circunferencia Exterior | 41" | Ancho Superior | .66" | Tipo | Correa en V Moldeada en Muesca de Sección Clasica |
|
|
Tri-Power; B 21/32 pulg. x 41 pulg. |
Constructed to provide superior performance on the toughest heavy-duty A, B
and C section industrial drives. Gates Tri-Power belts carry a higher horsepower
rating than conventional cross section belts. They are ideal for drives with
small diameter sheaves where conventional A, B and C section belts are not recommended.
- Vextra® construction that eliminates the stretch or elongation problems
associated with most V-belts, and increases belt service life by 33%.
- Special molded notch reduces bending stresses, especially on drives with
smaller diameter sheaves.
- Tough tensile members for superior resistance to fatigue and shock loads.
- Bandless cut edge for even wedging action and uniform fit.
- Meets or exceeds Rubber Manufacturer’s Association standards for
static conductivity.
- Gates V80 belt matching system.
Adicional Recursos Guía de Identificación de Correa
|
Fabricante Original de Equipo / Números de Intercambio: 86517927 |
|