|
BH SENS UVS4041
|
|
$21.79
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$21.79
Total
|
|
|
(Only 1 Remaining)
|
|
|
| BH SENS UVS4041 Specifications |
|---|
| Frequency MHz | 433 Mhz | 433 Mhz | | Sensor Type | IntelliSens (Universal Sensor) | IntelliSens (Universal Sensor) | | Valve Length | 41 mm | 41 mm | | Valve Type | Rubber Valve | Rubber Valve |
|
|
| 433MHz IntelliSens Universal Sensor; Rubber Valve (Snap-In) |
This sensor is blank and requires programming before installation.
The BH SENS Group is one of the pioneers in the development of modern direct measuring Tire Pressure Monitoring Systems (TPMS) for well-known car manufacturers and is one of the world's largest providers of TPMS solutions. BH SENS provides the market with original replacement sensors in OE quality for all systems supplied to vehicle manufacturers.
Features & Benefits:
- Programmable - Only take 3 seconds to configure to specific application.
- Supported by ATEQ, Matco, SnapOn, Mac Tools, Monster Tools, KTool, NAPA Tools, Bartec, OTC branded tools along with many others
- Always up-to-date with the new programming function via the TPMS diagnostic tool
- Covers multiple applications with one OE equivalent sensor
- Includes Valve
- Reprogrammable and Copy Clone Capable
- Full WAL and PAL technology support for auto-locate
Rubber (Snap-In) Installation: A rubber-enclosed valve piece is "snapped in" to the body with a valve screw.
 Program vs. Clone vs. Relearn Don't confuse TPMS Sensor Relearning, Programming and Cloning! Some processes require a Tire Pressure Monitoring System (TPMS) Programming Tool to complete, but not all processes are required (or available) for every application.
| PROGRAM |
Required only for Universal (Programmable) Sensors, in addition to TPMS Sensor Relearning. A TPMS Tool is required to:
- Program the specific Year/Make/Model protocol for the vehicle into the sensor
- Create or Clone a sensor ID onto the sensor
BEFORE INSTALLATION |
| CLONE |
Ideal for drivers who frequently swap wheels/tires, such as during the winter season. A relearn procedure is not required when sensors are cloned. A TPMS Tool is required to:
- Copy/Clone the unique ID from the original TPMS Sensor to the replacement sensor
BEFORE INSTALLATION |
| RELEARN |
Required when a new (not cloned) sensor ID is introduced or when the tires are rotated. A TPMS Tool may be required to:
- Write the unique sensor IDs to the vehicle's computer
- Assign the IDs to the correct wheel position (for vehicles that display pressure by location)
AFTER INSTALLATION |
Attention California Customers - WARNING: This product can expose you to 1,3-butadience, a chemical which is known to the State of California to cause cancer, birth defects or other reproductive harm - www.P65Warnings.ca.gov
|
BH SENS Warranty Information:36 Months |
|
.jpg)
