FVP
More Information for FVP RAD391
Continue Shopping
 
FVP RAD391  
Out of Stock
Price
Core
Pack
Total
FVP RAD391 Specifications
Height34"
Width17"
Depth2 1/8"
Inlet1 13/16"
Outlet1 13/16"
Trans Oil Cooler8 1/2" 4 PLT
Engine Oil Cooler8 1/2" 4 PLT
Top Header3 1/2" X 18 5/8"
Bottom Header3 1/2" X 18 5/8"
Features & Benefits:
  • Components are fitted and torqued in place to factory specifications for OE performance and quality
  • Premium grade tubes, fins, headers, tanks, and other components are used for improved durability
  • Engineering enhancements provide improved cooling and longer life cycle
    • Enhanced units with more fins per inch, thicker cores and larger transmission coolers overcome the added heat associated with high mileage vehicles
  • All necessary fittings or hardware are included (where pictured) for easy, drop-in installation
Service Tip: If you are experiencing unexplained or reoccurring radiator core leaks, or notice dark spots on your failed radiator core, test your coolant for Electrolysis. If detected, correct the source of the problem before replacing your failed radiator to prevent repeat failure.
FVP's Testing Process
  • Cycle testing - flowing preheated fluid through the unit as the pressure is raised and decreased to imitate driving conditions a minimum of 30,000 cycles.
  • Vibration testing - used to simulate pot holes, curbs and off-road use.
  • Burst testing - the gradual increase of pressure until the unit fails pointing out the weakest area of the unit.
  • Environmental testing - salt and chemical spray imitating road conditions found driving during winter and coastal conditions.
Measurement Guide

Cooling System Maintenance | Tips & Tools

Without regular maintenance, cooling system components will degrade and fail prematurely, which can lead to costly engine damage. Protect your engine with simple preventative maintenance:

  • Completely drain and flush the system using Cooling System Flush prior to installation. Flushing the system is critical to prevent system contamination and failure.
  • Consider replacing the Radiator Hoses (and Hose Clamps), Thermostat and Radiator Cap as part of routine preventative maintenance. System contamination can cause these parts to degrade and fail over time, which can lead to severe engine damage from overheating.
  • Refill radiator with fresh Coolant / Antifreeze according to the volume and formula specified in your Owner's Manual. Inspect levels and condition every year.
OEM / Interchange Numbers: 3094149, 3094150, 3094188, 3094189, 3094190, 3094191, 3095796, 52457626, 52457627

Warranty Information:
Limited Lifetime