CARTER
More Information for CARTER P77319S
Continue Shopping
 
CARTER P77319S  
Out of Stock
Price
Core
Pack
Total
Add to Cart
CARTER P77319Sclose
<
>
Part image
The float arm (where pictured) may ship detached to prevent damage in transit. To connect, simply snap the wire end into the sender hole.
CARTER P77319S Specifications
Average Current Draw6.0
Connector GenderMale
Connector ShapeRectangle
Fuel Tank Pressure Sensor IncludedNo
Fuel TypeGas
Gasket or Seal IncludedYes
In Tank or ExternalIn Tank
Inlet TypeStrainer
Internal Or External StrainerExternal
Minimum Flow Rating34
Minimum Pressure (psi)44
Outlet Outside Diameter (MM)9.5
Outlet Quantity1
Outlet TypeMale Quick Connect
Pump TypeElectric
Strainer IncludedYes
Terminal GenderMale
Terminal Quantity4
Terminal TypePin
Voltage12V
Wire Harness IncludedYes

The Carter In-Tank Fuel Pump & Strainer Set program features unique innovation and solutions by offering premium OE fit, form, and function as well as exceptional vehicle coverage and exclusive problem-solving features.

Features & Benefits:
  • Consistently deliver fuel at the precise pressure and flow rate the vehicle demands
  • Deliver optimum performance while keeping your fuel system free from any type of solid contaminants and impurities.
  • OE matched electrical connections and fuel outlet position on pump for ease of installation
  • Installation hardware included for a simple, hassle free repair
Benefits of Purchasing a Fuel Pump & Housing Assembly

Purchasing just the fuel pump is less expensive up-front, but a complete Fuel Pump & Housing Assembly provides added benefits:

  • Extend Service Life: New strainer(s), hoses, sensors and other components help resolve problems that could be caused by more than just the pump.
  • Reduce Install Time: Since you don't have to disassemble the housing, which could lead to damage, replacement becomes a simple swap, dramatically reducing installation time.
  • Save Money: The cost of the assembly is often cheaper than buying the components individually, and means you only have to do the job once.
Prevent Premature Fuel Pump Failure

Preventing premature fuel pump failure is far less expensive and time consuming than continuing to replace the pump. There are three common causes for premature fuel pump failure:

ELECTRICAL ISSUES
Poor electrical connections will mimic symptoms of a failed pump, sometimes resulting in unnecessary replacement. Before replacing the pump:
  • Use a Fuel System Tester to test pump pressure is within expected range
  • Use an Electrical Tester to test for bad wiring, burnt or corroded connectors
  • Check / Replace faulty Fuse(s) and Relay

BEFORE REPLACEMENT
FUEL CONTAMINATION
Dirt, rust or debris in the fuel can clog strainers and stick to internal pump components. When replacing the pump:
  • Replace Fuel Filter or Fuel Strainer
  • Empty and clean the tank with Fuel Tank Cleaner
  • Fill tank with fresh, uncontaminated fuel of appropriate grade

DURING REPLACEMENT
PUMP DAMAGE / OVERHEATING
Running low on gas causes your fuel to heat up quicker, and your pump to work harder. After replacing the pump:
  • Maintain at least 1/4 tank of fuel and use a Fuel Additive / Conditioner to keep pump cool and lubricated
  • If vehicle is stored without use, drain tank to prevent pump corrosion from fuel oxidation

AFTER REPLACEMENT

Attention California Customers - No Proposition 65 warning is required with this product.

OEM / Interchange Numbers: 25162589

CARTER Warranty Information:
12 months: Carter Mechanical Fuel Pumps, Carter Fuel System Accessories. Limited Lifetime: Carter Electric Fuel Pumps and Assemblies.
Warranty Details