no es necesario programar Antes de Instalación - Siga el proceso de reaprendizaje del equipo original Después de Instalación.
Los productos de Ultra-Power provienen de una variedad de fuentes, incluidas las marcas conocidas reenvasadas de fábricas en el extranjero certificadas como ISO/TSO/QS. Comparten algunos de los mismos proveedores que las grandes marcas, pero mantienen los costos bajos para pasarle los ahorros a usted.
Rubber (Snap-In) Installation: A rubber-enclosed valve piece is "snapped in" to the body with a valve screw.
Programa versus Clon versus Reaprender
Don't confuse TPMS Sensor Relearning, Programming and Cloning! Some processes require a Tire Pressure Monitoring System (TPMS) Programming Tool to complete, but not all processes are required (or available) for every application.
PROGRAM
Required onlyfor Universal (Programmable) Sensors, in addition to TPMS Sensor Relearning. A TPMS Tool is required to:
Program the specific Year/Make/Model protocol for the vehicle into the sensor
Create or Clone a sensor ID onto the sensor
BEFORE INSTALLATION
CLONE
Ideal for drivers who frequently swap wheels/tires, such as during the winter season. A relearn procedure is not required when sensors are cloned. A TPMS Tool is required to:
Copy/Clone the unique ID from the original TPMS Sensor to the replacement sensor
BEFORE INSTALLATION
RELEARN
Required when a new (not cloned) sensor ID is introduced or when the tires are rotated. A TPMS Tool may be required to:
Write the unique sensor IDs to the vehicle's computer
Assign the IDs to the correct wheel position (for vehicles that display pressure by location)
AFTER INSTALLATION
Advertencia: Este producto contiene químicas conocidas en el estado de California que causa cáncer y defectos de nacimiento u otros daños reproductivos. Para más información ir a www.P65Warnings.ca.gov.
Fabricante Original de Equipo / Números de Intercambio: 20923680, 22853741, 23445327, 25037332, 25920615