SILV-O-LITE
More Information for SILV-O-LITE 3526HCA
{Alternate Inventory Numbers: 3526HCA.75MM, 3526HCA.5MM, S3526HCA.75MM, 3526HCA.1.0MM, 3526HCASTD, S3526HCA10MM, S3526HCA5MM, S3526HCASTD}
Continue Shopping
 
SILV-O-LITE 3526HCA  
Choose Size Below
Price
Core
Pack
Total
Add to Cart
Choose Size:
  •  
  • 0.75MM Oversize (Only 1 Remaining) ($63.99/Each) x1 $63.99 Warehouse
  • 0.50MM Oversize ($37.79/Each) x8 $302.32 Warehouse
  • 0.75MM Oversize ($37.79/Each) x8 $302.32 Warehouse
  • 1.00MM Oversize ($37.79/Each) x8 $302.32 Warehouse
  • Standard ($37.79/Each) x8 $302.32 Warehouse
SILV-O-LITE 3526HCAclose
Part image
SILV-O-LITE 3526HCA Specifications
Bore Diameter (IN)3.7795
Bore Diameter (MM)96
Compression Height (In)1.328
Compression Height (mm)33.7
Crown (cc)+1.95cc
Crown TypeFlat Top
Engine FamilyChevy Small Block Gen III/IV (LS-Based Engines)
Engine ManufacturerGM
LockSRW-012
Oil Ring Thickness (mm)3.0000
Pin ConfigurationOffset
Pin Number0943x223A
Pin TypeFloating
Piston Head TypeFlat
Piston MaterialCast 390 Hypereutectic Alloy
Piston Pin Outside Diameter (In).943
Piston Pin Outside Diameter (mm)23.95
Second Compression Ring Thickness (mm)1.5
Top Compression Ring Thickness (mm)1.5
Top Land.185
Vin CodeA, 0, 3, 4, P, 7, J, M
Hypereutectic; With Anodized Head, Crown and Top ring; Flat Top with two Valve Reliefs; Floating Pin; Coated Skirts

For 100 years Silv-o-lite has produced high quality OE replacement pistons for engine rebuilding. Every manufacturing process is done in house, including alloying the aluminum, casting, heat treating, diamond machining, and a full array of anodizing and coatings for the piston crowns, ring grooves, and skirts.

Anodizing Features:
  • Limits micro welding of ring to groove in severe conditions
  • Produces a very hard surface for ring to rotate on
  • Creates barrier from corrosive fuels
Additional Resources

General Installation Instructions
OEM / Interchange Numbers: 19208675, 19208676, 89060483, 89060486, FMA24A

SILV-O-LITE Warranty Information:
12 Months