• Superior Toughness: Get longer-lasting performance from patented sintered bearings
• Simple To Service: Make servicing a snap with the SAE grease fitting included
• Corrosion Protected: Prevent rust build up and increase longevity with protective surface treatment.
• Includes Hardware: Simplify installation with all essential mounting hardware included
• Rigorously Tested: Extensive in-house and third-party durability testing ensures ultimate performance and strength

How To Determine Stabilizer (Sway) Bar Diameter

To determine Stabilizer (Sway) Bar diameter, measure the bar next to the bushing (toward the center of the vehicle), utilizing one of the methods below.

1. Use a digital caliper or micrometer for a precise reading
2. Use an open end wrench that fits snug around the bar, or tighten an adjustable wrench around the bar, and then measure the span opening
3. Wrap a piece of non-stretchable tape (like masking tape) around the bar to get the circumference. Circumference divided by Pi (3.14) = Diameter. In the example below, the tape measured 3 5/8". 3 5/8 = 29/8 = 3.63 inches. Diameter = 3.63/3.14 = 1.15 inches.

Videos