MOOG
More Information for MOOG 290
Continue Shopping
 
MOOG 290  
$15.65
Price
$0.00
Core
+ Sold in packs of 1x1
Pack
$15.65
Total
MOOG 290close
<
>
Part image
MOOG 290 Specifications
Bearing Cap Axis 1 Diameter1.063 IN
Bearing Cap Axis 1 Diameter27 MM
Bearing Cap Axis 2 Diameter1.125 IN
Bearing Cap Axis 2 Diameter28.6 MM
Bearing Cap Type2 Grooved & 2 Plain Round Bearings
Bearing Type ARound Plain
Bearing Type BRound Grooved
GreaseableYes
Length Axis 13.622 in
Length Axis 192 mm
Length Axis 22.56 in
Length Axis 265 mm
Length Measurement AOutside of Bearing To Outside of Bearing
Length Measurement BInside of Groove to Inside of Groove plus thickness of 2 Lock Rings
Lube Fitting LocationFlush-type lube fitting in bearing
OE SeriesCombination 354 x 534G
Part DescriptionUniversal Joint
U-Joint Identification2 Grooved & 2 Plain Round Bearings
Super Strength; Greasable
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.

Features & Benefits:
  • Super Strength™ alloy steel crosses for higher torque and horsepower
  • Flush lube fitting in the bearing cap for added strength
  • Exclusive MICRO SHIELD coating resists corrosion that may weaken the cross
  • Needle bearings sourced from OE supplier for size consistency, proper hardness, and strength
  • Extra strength carboxylated nitrile rubber grease seals use a compressed double lip design for protection from contaminants
  • Consistent heat treatment achieves good bearing hardness for durable wear and strength
Which Universal Joint Is Right For You?

Drive Conditions
Type Normal City / Highway Dirty / Dusty Extreme Weather Heavy Towing Off-Road / Racing
Economy
Check Mark Icon
Standard Replacement
Check Mark Icon Check Mark Icon
Heavy Duty Check Mark Icon Check Mark Icon Check Mark Icon Check Mark Icon Check Mark Icon

Greasable vs. Non-Greasable

While non-greasable universal joints were once considered an upgrade over greasable universal joints, the differences in strength and durability are negligible today. Advancements in technology mean either option is a great choice, but there are some key pros and cons to consider:

NON-GREASABLE
  • Pros: Non-Greasable U-Joints do not need to be serviced regularly. After installation, these U-Joints require little upkeep and primarily need to be monitored for signs of failure.
  • Cons: Since these U-Joints cannot be re-greased, the entire U-Joint must be replaced at the first sign of wear / noise as to not risk failure.
GREASABLE
  • Pros: Greasable U-Joints are serviceable and contaminants can be flushed out easily. Regular maintenance and greasing also means you'll be more in tune with the wear status of the joints.
  • Cons: These U-Joints need to be checked and greased regularly. If this sounds unfavorable or if you're forgetful, non-greasable may be a better choice.
Preventative Maintenance Tips

The key to maximizing the performance and durability of any universal joint - as well as related parts such as drive shafts - is preventative maintenance. Universal joints are designed to last the life of the vehicle, but can wear down or break if neglected or overloaded. Follow these tips to avoid premature failure of your vehicle's drivetrain:

  • If a greasable universal joint is installed, periodically check them to ensure they are properly greased (at the very least, at every oil change).
  • Inspect the yokes that hold your universal joints for cracks, stress marks, or worn or damaged seal mating surfaces, and replace them if any of these are present.
  • Check your seals for signs of leakage, and replace them if leaks are present.
  • Periodically check for drive shaft play, which is an indication that a universal joint or seal has failed and needs to be replaced.
  • Inspect drive shafts for cracks, stress marks, dents, or bends, and replace them if any of these are present.
OEM / Interchange Numbers: 12545628, 14034819, 26002697, 5093820AA, 89058949

Warranty Information:
Limited Lifetime