FRAM CH10415
|
|
$9.68
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$9.68
Total
|
|
|
|
FRAM CH10415 Specifications |
---|
Anti-Drain Back Valve | No | Bypass Relief Valve | No | Filter Media Material | Cellulose/Synthetic Blend | Filter Type | Cartridge | Height (IN) | 4.117 | Housing Color | NA | Inside Diameter Bottom (IN) | 1.675 | Non Slip Grip | No | O-Ring Inside Diameter (in) | 3.467 | O-Ring Outside Diameter (in) | 3.625 | O-Ring Thickness (in) | 0.158 | O-rings included | Yes | Outer Diameter Bottom (IN) | 3.211 | Outer Diameter Top (IN) | 3.211 | Replaceable Filter | Yes | Reusable | No | Top Inside Diameter (IN) | 1.675 | Torque Nut | No | Washable | No |
|
|
Extra Guard; Cartridge Filter |
With 10,000 miles of protection, Extra Guard® is the perfect filter for everyday drivers who perform oil changes at OE recommended intervals. Extra Guard® has cellulose and glass blended media that provides advanced engine protection for your vehicle. Engineered with a silicone anti-drain back valve, Extra Guard® meets all manufacturer's recommended change intervals.
Features & Benefits:-
Fiber and resin blend creates a proprietary filter media to capture 95% of dirt particles that cause harmful engine wear.
-
FRAM Extra Guard provides the perfect balance of dirt-trapping efficiency and dirt-holding capacity.
- Extra Guard is the perfect filter for everyday drivers who perform frequent maintenance on their vehicles.
Which Oil Filter Is Right For You?
| Driving Style |
Filter Type |
Oil Change Intervals |
Normal City / Highway |
Heavy Traffic |
Dirty / Dusty Conditions |
Extreme Weather |
Towing |
Economy
|
3,000 - 5,000 Miles |
★ |
|
|
|
|
Standard Replacement
|
OEM Recommended |
★ |
★ |
★ |
|
|
High Performance / Heavy Duty
|
OEM Recommended |
★ |
★ |
★ |
★ |
★ |
Oil Change Toolbox
Installation Instructions - Check owner's manual for correct oil specification, viscosity, and amount. Purchase oil by year, make, and model, or under the Tools & Universal Parts tab on RockAuto.com
- Wear proper protective gear (safety glasses, gloves, long sleeve shirt) to protect skin and eyes from hot oil.
- Place a Drain Pan under the crankcase and carefully open drain plug to drain oil. When oil is fully drained, reinstall drain plug on the oil pan.
- Position the drain pan under the oil filter. Unscrew oil filter (using a Filter Wrench, if necessary).
- Clean mounting base, making sure the O-ring from the old filter is not stuck to the filter mount.
- Apply film of clean oil to filter gasket.
- Screw new filter on until gasket reaches base contact, then tighten filter to manufacturer specifications.
- Add oil to “full” on dipstick. Idle engine for 5 minutes and check for leaks.
- Shut off engine and recheck oil level after 5 minutes. Top off as necessary.
It is illegal to dispose of used oil or oil filters in a sanitary landfill or public waterway. Many towns have free hazardous waste drop-off sites, which a quick internet search will help you find.
|
OEM / Interchange Numbers: 30750013, LR001419 |
FRAM Warranty Information:Filters - Vehicle Manufacturer's Recommended Service Intervals Hard Parts - 12 MonthsWarranty Details |
|