OSC
More Information for OSC HD9266
Continue Shopping
 
OSC HD9266  
$552.79
Price
$0.00
Core
+ Sold in packs of 1x1
Pack
$552.79
Total
(Only 1 Remaining)
OSC HD9266close
Part image
OSC HD9266 Specifications
Core Height28-9/16 in
Core Width28-11/16 in
Core Thickness2-1/4 in
Core Height725 mm
Core Width728 MM
Core Thickness56 mm
Inlet Header Width3-5/16 in
Inlet Header Length29-3/16 in
Outlet Header Width3-5/16 in
Outlet Header Length29-3/16 in
Inlet Diameter57 mm
Outlet Diameter64 mm
Inlet Diameter2-1/4 in
Outlet Diameter2-1/2 in
Core MaterialPlastic Aluminum
Header StyleCSX4; 4-Crimp Strips over the tabs
Heavy Duty

Features & Benefits

  • Drop in fit, form and function for hassle-free installation
  • All necessary hardware or fittings are included in each unit
  • 100% Leak Tested
  • Premium grade tubes, fins, headers, tanks, and other components
  • Components are fitted and torqued in place to factory specifications
Service Tip: If you are experiencing unexplained or reoccurring radiator core leaks, or notice dark spots on your failed radiator core, test your coolant for Electrolysis. If detected, correct the source of the problem before replacing your failed radiator to prevent repeat failure.
OSC's Testing Process
  • Cycle testing - flowing preheated fluid through the unit as the pressure is raised and decreased to imitate driving conditions a minimum of 30,000 cycles.
  • Vibration testing - used to simulate pot holes, curbs and off-road use.
  • Burst testing - the gradual increase of pressure until the unit fails pointing out the weakest area of the unit.
  • Environmental testing - salt and chemical spray imitating road conditions found driving during winter and coastal conditions.
Measurement Guide

Cooling System Maintenance | Tips & Tools

Without regular maintenance, cooling system components will degrade and fail prematurely, which can lead to costly engine damage. Protect your engine with simple preventative maintenance:

  • Completely drain and flush the system using Cooling System Flush prior to installation. Flushing the system is critical to prevent system contamination and failure.
  • Consider replacing the Radiator Hoses (and Hose Clamps), Thermostat and Radiator Cap as part of routine preventative maintenance. System contamination can cause these parts to degrade and fail over time, which can lead to severe engine damage from overheating.
  • Refill radiator with fresh Coolant / Antifreeze according to the volume and formula specified in your Owner's Manual. Inspect levels and condition every year.
Videos

OSC Manufacturing Standards

OEM / Interchange Numbers: 2601756C92, 3E0124850000

OSC Warranty Information:
Limited Lifetime