DELPHI TD1025W
|
|
$2.51
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$2.51
Total
|
|
(Only 2 Remaining)
|
|
DELPHI TD1025W Specifications |
---|
Position(s) | Rear, Rear Left, Rear Right. For the position specific to your vehicle, refer to the Application tab. |
|
|
Thanks to their good damping properties and excellent load carrying capabilities, Delphi Technologies bushings absorb unwanted vibrations and sound, providing a comfortable and quiet ride, as well as improving vehicle stability and safety.
Since bushings are subject to high dynamic stresses day-in, day-out, Delphi Technologies only ever uses the highest quality materials. By carefully balancing the precise quantities of steel and rubber, Delphi Technologies bushings provide the optimum combination of strength, flexibility and noise reduction, tailored to the application they fit.
Rubber vs. Thermoplastic vs. Polyurethane - What Is The Difference?
Bushing Material |
Maintenance Free |
Ride Type |
Lifespan |
Noise/Squeak |
Easier to Install |
Rubber
|
![Check Mark Icon](https://www.rockauto.com/Images/greenCheck.png) |
Replicates OE |
![](/genImages/856/hourglass.png) |
|
|
Polyurethane
|
|
Very Stiff |
![](/genImages/856/hourglass.png) ![](/genImages/856/hourglass.png) ![](/genImages/856/hourglass.png) |
![Check Mark Icon](https://www.rockauto.com/Images/greenCheck.png) |
![Check Mark Icon](https://www.rockauto.com/Images/greenCheck.png) |
*Not All Materials Are Offered For All Applications
Sway Bar Bushing diameter can be within 1mm of your Sway Bar diameter. The clamping force of the bracket will account for the variance.
![](/Images/MoreInfo/install.png) How To Determine Stabilizer (Sway) Bar Diameter To determine Stabilizer (Sway) Bar diameter, measure the bar next to the bushing (toward the center of the vehicle), utilizing one of the methods below.
- Use a digital caliper or micrometer for a precise reading
- Use an open end wrench that fits snug around the bar, or tighten an adjustable wrench around the bar, and then measure the span opening
- Wrap a piece of non-stretchable tape (like masking tape) around the bar to get the circumference. Circumference divided by Pi (3.14) = Diameter. In the example below, the tape measured 3 5/8". 3 5/8 = 29/8 = 3.63 inches. Diameter = 3.63/3.14 = 1.15 inches.
![](/genImages/diaMeasureAll.jpg)
Attention California Customers - WARNING: This product can expose you to chemicals including Formaldehyde, which is known to the State of California to cause cancer, and Toluene, which is known to the State of California to cause birth defects or other reproductive harm. For more infor
|
OEM / Interchange Numbers: 2D0511413, 5103955AA, 5103955AB, 6013210350, A2D0511413, A6013210350 |
Warranty Information:Limited Lifetime |
|