TRANSGO
More Information for TRANSGO SK6R80G2
{Alternate Inventory Numbers: K116908A, T49165AA}
Continue Shopping
 
TRANSGO SK6R80G2  
$84.79
Price
$0.00
Core
+ Sold in packs of 1x1
Pack
$84.79
Total
TRANSGO SK6R80G2close
<
>
Part image
TRANSGO SK6R80G2 Specifications
Installation NoteTransmission Removal Not Required
Shift Kit; For 6R60, 6R75, 6R80 GEN2 Transmissions
The TransGo Ford 6R80 GEN2 Shift Kit® Valve Body Repair Kit fits 2015-2019 Ford vehicles equipped with the GEN2 6R80 only. If you are working on a GEN1 2006-2014, then use TransGo SK 6R80-A.

Common concerns with this transmission are TCC shudder, rough coast down shifts, gear ratio error and solenoid performance codes. Firstly, these complaints are the result of the wear in the pressure regulator (PR) valve bore and the pressure regulator valve balance bushing. Secondly, the torque converter clutch regulator valve design and calibration were in dire need of an upgrade to address the TCC shudder complaint.

Features and benefits:

The kit includes a hardened steel drop-in two-piece pressure regulator valve and a redesigned TCC regulator valves for a quick no-hassle install. Our drop in valves require no reaming or tooling.

Both the redesigned drop-in steel two-piece PR valve and TCC regulator valve feature longer lands which restores the hydraulic integrity of the circuit by utilizing previously unused and therefore unworn areas of their bore. Furthermore, the longer lands increase bore longevity by redistributing the load over a greater surface area. The kit also includes new rubber dampener inserts that flatten out over time and new wire retainer clips to replace the occasional broken one.

Corrects/Prevents/Reduces:
  • 28-46 MPH TCC shudder due to TCC regulator malfunction
  • Erratic pressure due to PR malfunction
  • Soft or long shifts
  • Coast downshift clunk
  • Gear ratio codes: P0731, P0732, P0733, P0734, P0729
  • Shift error codes: P0781, P0782, P0783, P0784, P0829
Includes:
  • Patent-pending drop-in USA-made hardened steel two-piece PR valve
  • USA-made aluminum PR valve boost bushing
  • Drop-in USA-made hardened steel TCC regulator valve
  • (2) Calibration springs
  • (4) New valve body bore plug wire retainers
  • (6) New solenoid dampener rubber inserts
TransGo Shift Kit vs. Reprogramming Kit

Shift Kit® -- DESIGNED FOR DURABILITY

TransGo Shift Kit® valve body repair kits correct, prevent and reduce multiple transmission problems such as shift irregularities and durability issues. These kits are designed for normal everyday use and light duty towing.

Reprogramming Kit -- ENGINEERED FOR PERFORMANCE

TransGo Reprogramming Kit™ valve body performance kits are made for Heavy Duty and/or Performance applications, and include additional features such as:

  • Gear Command™: Allows full control of downshifting and will hold any gear to any RPM. Retains automatic up shifts in the drive position. Certain units allow manual up shifts on driver command.
  • Manual Shift Control: This feature fully converts the valve body to manual/stick shift operation – no automatic shifts. Most Manual Shift Control kits also allow you the ability to easily convert back to automatic.
  • Tuneless: Patent-pending internal calibration technology “tuneless” allows install without the need for additional transmission tuning software or programmers.

What is a Shift Kit?
TransGo Shift Kit® valve body repair kits are a combination of new and re-engineered components that are primarily installed in the valve body, but sometimes the pump or even in the transmission itself. These kits solve a variety of inherent problems and weaknesses that differ by transmission model, including usual warp and wear, often allowing a higher mileage transmission to work better than a new one. Typical components of a valve body repair kit include springs, valves, check balls, gaskets, separator plates, etc.

Additional Resources

Additional Product Information
TransGo Technical Support

If you are having trouble choosing the correct TransGo part, or have questions before, during or after installation of this part, TransGo's ASE Certified Technicians are available to help.

📞 Phone: 626-443-7451 (7:00am-4:00pm PST M-F)
📧 Email: support@transgo.com



TRANSGO Warranty Information:
12 Months