Brake Pads are sold as a set. Quantity of one (1) is for both wheels
DYNAMIC FRICTION 4000228401 Specifications
FMSI Number
9521-D2284
Friction Material Attachment
Integrally Molded
Friction Material Composition
Hybrid
Inner Pad Height
3.752 in
Inner Pad Overall Thickness
0.433 IN
Inner Pad Width
7.079 in
Mounting Hardware Included
Yes
Outer Pad Height
3.752 in
Outer Pad Overall Thickness
0.433 IN
Outer Pad Width
7.079 in
Pad Wear Sensor Included
No
Pad Wear Sensor Type
Mechanical
Prepared For Pad Wear Sensor
Yes
Includes Hardware
The DFC HybriDynamic brake pad formulation is designed to deliver a consistent pedal feel and superb brake response at a great value, taking the guesswork out of choosing the right brake pad material. Not only does the DFC 4000 HybriDynamic Brake Pad provide superior performance for enhanced safety, but it also boasts low dust and low noise characteristics.
Installation Tips
Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function
Installation Tips