Rotors are fully GEOMET® coated, including inside the vanes, to protect against rust & corrosion
Rotors are cast and machined to industry leading specifications
Evolution Ceramic Brake Pads deliver low dust braking performance to keep your wheels clean
Dual-Layer Rubberized Pad Shims provide better noise insulation for virtually silent braking
Pads are chamfered and slotted to ensure noise-free braking
Stainless steel hardware included where applicable for an easy, problem-free installation
Installation Tips
Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
Before installing the rotor, clean the hub face with a Wire Brush to remove rust buildup and apply Copper Anti Seize to prevent future buildup. Rust or debris on the hub can cause rotor runout and lead to wheel vibration
Apply brake lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function
POWER STOP Z17 Evolution Clean Ride Ceramic with HardwareInfo
POWER STOP
Attention California Customers - WARNING: This product can expose you to chemicals including Arsenic, Cadmium, Chromium (Hexavalent compounds), Lead, Nickel, Cobalt and Antimony Trioxide which are known to the State of California to cause cancer, and Arsenic, Cadmium and Chromium (Hexavalent compounds) which are known to the State of California to cause birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.
Installation Tips
Videos
