If you are an experienced track day enthusiast or are competing in a racing series and want the ultimate performance track brake kit, then look no further than Power Stop Track Day Spec brake kits. The Power Stop research and development team spent countless hours matching the right rotor/pad combination to each individual vehicle platform so you don't have to spend countless track days figuring it out yourself. These platform-specific brake kits have an excellent coefficient of friction and resist fade during the rigors of your favorite track day event.
Features & Benefits:
Ideal for drivers with higher skill level and R-Compound tires
Includes High Quality OE replacement brake rotors
High coefficient of friction when cold, even higher when hot
Friction material designed specifically for high-level track day or competitive use in mind
Very consistent and stable modulation
Superior pedal feel
Abutment Clips, Tension Clips, and Pin Bushings included where applicable
Installation Tips
Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
Before installing the rotor, clean the hub face with a Wire Brush to remove rust buildup and apply Copper Anti Seize to prevent future buildup. Rust or debris on the hub can cause rotor runout and lead to wheel vibration
Apply brake lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function
Attention California Customers - WARNING: This product can expose you to chemicals including Arsenic, Chromium (Hexavalent compounds), Lead, Nickel, Cobalt and Antimony Trioxide, which are known to the State of California to cause cancer, and Arsenic and Chromium (Hexavalent compounds) which are known to the State of California to cause birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.
Installation Tips
Videos
