w/ Semi-Metallic Brake Pads; Does Not Include Hardware
DuraGo Rotor & Brake Pad Kits are engineered to meet all requirements of fit, form and function.
Features & Benefits:
High temperature friction material provides fade free performance
Rotors are dynamometer tested for maximum stopping power in a wide variety of road conditions
Pads are shimmed, slotted and chamfered for maximum performance
Single layer noise dampening shims are installed during the manufacturing process
Multi-Stage quality control process to ensure parts meet dimensional and weight specifications
Manufactured in ISO/TS 16949 certified facilities
Installation Tips
Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
Before installing the rotor, clean the hub face with a Wire Brush to remove rust buildup and apply Copper Anti Seize to prevent future buildup. Rust or debris on the hub can cause rotor runout and lead to wheel vibration
Apply brake lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function
Installation Tips
