GATES G251230606
|
|
$23.79
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$23.79
Total
|
|
|
|
GATES G251230606 Specifications |
---|
Bent Tube Angle | 90 Block | Coupling Description | MegaCrimp Male O-Ring Boss Swivel - 90 Block | Cut Off (IN) - C | .85 | Cut Off (MM) - C | 21.7 | Drop (IN) - T | 1.67 | Drop (MM) - T | 42.5 | Gender | Male | Hose Inside Diameter (IN) | .375 | Hose Inside Diameter (MM) | 9.5 | Hose Recommendation | Can Accommodate Various Hose Outside Diameters on Both One-Wire & Two-Wire Braid Hydraulic Hose | Length (IN) - L | 2.41 | Length (MM) - L | 61.2 | Nut Hex (IN) - H2 | .875 | O-Ring Location | Outside O-Ring Boss | Seal Type | O-Ring | Swivel | Yes | Thread Size | 9/16-18 |
|
|
Male O-Ring Boss Swivel - 90 Block (MegaCrimp) |
Gates MegaCrimp couplings are designed for use with Gates wire braid hydraulic hose to create a robust, leak-free assembly. The pre-assembled coupling is designed with a patented C insert attached to the ferrule. This design ensures that crimping forces are evenly distributed to form a concentric, leak-free seal. One MegaCrimp coupling size can accommodate various one and two-wire braid hydraulic hoses of different constructions and wall thicknesses, simplifying inventory requirements, helping to reduce costs and simplifying coupling selection. - Robust bite-the-wire crimp
- Low profile
- Full-stem insertion
- Full-length crimp
- Tested to industry-leading 600,000 impulse cycles
- Simplifies inventory management
- Environmentally-friendly TuffCoat plating for 345 percent better corrosion resistance than SAE standard
Not to be used as a live swivel. Internal O-rings rated at +250 Deg. F (+121 Deg. C). SAE J1926/3 ISO 11926-3 Light-Duty (L Series) Stud End.
|
|