|
GATES G256150612
|
|
$7.79
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$7.79
Total
|
|
|
|
|
|
| GATES G256150612 Specifications |
|---|
| Bent Tube Angle | Straight | | Coupling Description | MegaCrimp Male DIN 24 Cone - Light Series | | Cut Off (IN) - C | .97 | | Cut Off (MM) - C | 24.6 | | DIN Series | Light | | Gender | Male | | Hose Inside Diameter (IN) | .375 | | Hose Inside Diameter (MM) | 9.5 | | Hose Recommendation | Can Accommodate Various Hose Outside Diameters on Both One-Wire & Two-Wire Braid Hydraulic Hose | | Length (IN) - L | 2.07 | | Length (MM) - L | 52.5 | | O-Ring Location | On Female w/Inverted Nose Seat | | Seal Type | Mated Angle w/O-Ring | | Seated Angle | 24 | | Stem Hex (MM) - H1 | 19 | | Swivel | No | | Termination | DIN | | Thread Size | M18x1.5 | | Tube Outside Diameter (MM) - A1 | 12 |
|
|
| Male DIN 24 Cone - Light Series (MegaCrimp) |
Gates MegaCrimp couplings are designed for use with Gates wire braid hydraulic hose to create a robust, leak-free assembly. The pre-assembled coupling is designed with a patented C insert attached to the ferrule. This design ensures that crimping forces are evenly distributed to form a concentric, leak-free seal. One MegaCrimp coupling size can accommodate various one and two-wire braid hydraulic hoses of different constructions and wall thicknesses, simplifying inventory requirements, helping to reduce costs and simplifying coupling selection. - Robust bite-the-wire crimp
- Low profile
- Full-stem insertion
- Full-length crimp
- Tested to industry-leading 600,000 impulse cycles
- Simplifies inventory management
- Environmentally-friendly TuffCoat plating for 345 percent better corrosion resistance than SAE standard
|
Closeout Inventory Warranty Information:Wholesaler Closeout items have a 30 day warranty (but still are covered by our Return Policy).GATES Regular Inventory Warranty Information:Limited LifetimeWarranty Details |
|
