Power Stop's Z26 Street Warrior Performance Brake Pad, Rotor, Drum and Shoe Kits include 2 Power Stop Drilled & Slotted brake rotors, a set of Power Stop Z26 Street Warrior brake pads, a set of Power Stop Evolution Premium Coated brake drums, a complete set of brake shoes, the spring/hold-down kit, and adjusters (where available). This kit has what it takes to tame your high-horsepower vehicle.
Features & Benefits:
Rotors, pads & hardware engineered to work together to increase stopping power, improve durability & eliminate dust
Drilled & Slotted performance rotors for maximum cooling
Rotors (except for hub assemblies) are zinc plated for maximum protection against rust
Proprietary Z26 carbon-fiber ceramic pads enhance heat dissipation versus a typical ceramic brake pad for better stopping power at high speed
Premium shoes are made from 100% new steel, plus are cam ground and chamfered to ensure precise fit and noise-free operation
Premium drums are coated in a silver rust preventative paint that is oven cured so it keeps looking good despite high temperatures
Comes with everything you need to get the job done, including stainless steel installation hardware, shoe installation hardware, adjuster kits (where available) and high temperature ceramic brake lubricant
Brand new shoe hold-down hardware ensures that you don't have to deal with the old worn out/broken springs, pins or cups
Installation Tips
Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
Before installing the rotor, clean the hub face with a Wire Brush to remove rust buildup and apply Copper Anti Seize to prevent future buildup. Rust or debris on the hub can cause rotor runout and lead to wheel vibration
Apply brake lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function
Attention California Customers - WARNING: This product can expose you to chemicals including Arsenic, Cadmium, Chromium (Hexavalent compounds), Antimony Trioxide, Lead, Nickel, Cobalt and Carbon (Black), which are known to the State of California to cause cancer, and Arsenic, Cadmium and Chromium (Hexavalent compounds) which are known to the State of California to cause birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.
Installation Tips
Videos
