|
PERMATEX 80022
|
|
$3.26
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$3.26
Total
|
|
|
|
|
|
|
|
|
OEM specified. The original Permatex Blue now with low odor formula. Will not foul oxygen sensors. Replaces almost any cut gasket. Makes reliable “formed-in-place” gaskets that resist cracking, shrinking and migrating. Coats pre-cut gaskets to increase reliability. Temperature range -65°F to 500°F (-54°C to 260°C) intermittent; resists auto and shop fluids.
Suggested Applications: Valve covers, oil pans, timing covers, water pumps, thermostat housings
Directions for Use:
- For best results, clean and dry all surfaces with a residue-free solvent, such as Permatex® Brake and Parts Cleaner
- Cut nozzle to desired bead size. Gaskets are best formed using a 1/16? to 1/4? (2 to 6 mm) bead
- Apply a continuous and even bead of silicone to one surface; surround all bolt holes. Assemble parts immediately. Finger tighten bolts until material begins to squeeze out around flange. Allow to dry for one hour then retighten 1/4 to 1/2 turn
- Silicone dries in 1 hour, and fully cures in 24 hours. Allow more time in cold or very dry conditions
- Replace cap after use. Clean hands with dry cloth or Permatex® Fast Orange® Hand Cleaner. Clean tools with non-flammable cleaning fluid.
NOTE: Not recommended for use on head gaskets or parts in contact with gasoline.
|
|
