FVP
Más Información para FVP BSK5242
Continuar Haciendo Compras
 
FVP BSK5242  
No Disponible
Precio
Depósito
Empacar
Total
FVP BSK5242close
<
>
Part image
Especificaciones de FVP BSK5242
Longitud Ensamblado35 mm
Soporte IncluidoNo
grasera IncluidoNo
Diámetro interno20 mm
MaterialGoma
Diámetro Externo36 mm
Contenidos de paquete2 Bujes
Ancho36 mm
Características:
  • Probado rigurosamente - las exhaustivas medidas de control de calidad garantizan la longevidad
  • Construcción duradera - fabricados según normas estrictas con materiales resistentes y seguros
  • Reemplazo Directo - diseñado con precisión para que coincida con el diseño y las dimensiones de los componentes originales
Sway Bar Bushing diameter can be within 1mm of your Sway Bar diameter. The clamping force of the bracket will account for the variance.
Cómo Determinar el Diámetro de Barra Estabilizadora

To determine Stabilizer (Sway) Bar diameter, measure the bar next to the bushing (toward the center of the vehicle), utilizing one of the methods below.

  1. Use a digital caliper or micrometer for a precise reading
  2. Use an open end wrench that fits snug around the bar, or tighten an adjustable wrench around the bar, and then measure the span opening
  3. Wrap a piece of non-stretchable tape (like masking tape) around the bar to get the circumference. Circumference divided by Pi (3.14) = Diameter. In the example below, the tape measured 3 5/8". 3 5/8 = 29/8 = 3.63 inches. Diameter = 3.63/3.14 = 1.15 inches.


Atención Clientes de California - ADVERTENCIA: Cáncer y Daño Reproductivo - www.P65Warnings.ca.gov

Fabricante Original de Equipo / Números de Intercambio: 3903083

Información de Garantía:
Limitado por vida