|
DORMAN 626332
|
|
$57.79
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$57.79
Total
|
|
|
|
|
|
| DORMAN 626332 Specifications |
|---|
| Axis 1 Length (MM) | 350 | | Branch Quantity | 1 | | Burst Pressure (PS) | 75 | | Centerline Length (MM) | 350 | | Clamps Included | No | | Color | Black | | Contains Spring | No | | Coolant Hose Heat Shield Included | No | | Coolant Hose Type | Single I.D. (Inside Diameter) | | End 1 Attachment Type | Quick Disconnect | | End 1 Inside Diameter (MM) | 25.5 | | End 1 Type | Quick Disconnect | | End 2 Attachment Type | Quick Disconnect | | End 2 Inside Diameter (MM) | 24 | | End 2 Type | Quick Disconnect | | Hose Attachment End 1 | Quick Disconnect | | Hose Attachment End 2 | Quick Disconnect | | Hose End (1) Outside Diameter (IN) | 30 mm | | Hose End (2) Outside Diameter (IN) | 29.6 mm | | Hose Material | EPDM | | Hose Outside Diameter | 18 mm | | Hose Overall Length (IN) | 350 mm | | Hose Shape | Molded Assembly | | Inside Diameter | 11 mm | | Length | 350 mm | | Maximum Bend Angle | 135 | | Maximum Working Pressure (PS) | 100 | | Mounting Bracket Included | No | | Outside Diameter | 18 mm | | Package Contents | 1 Heater Hose Assembly | | Protective Sleeve Attached | No | | Thermostatically Controlled | No |
|
|
This replacement HVAC heater hose assembly is engineered to match the fit and durability of the stock heater hose assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.
Features & Benefits:
- Ideal replacement - this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models
- Durable construction - this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
- Cost-effective and reliable - offers original manufacturer quality at lower cost than getting replacement at dealer
- Industry-leading design - professionally engineered by the aftermarket leader in heater hose assemblies
 Signs it is Time to Replace Your Heater Hose(s) Prevent system contamination and coolant leaks that could cause your engine to overheat by checking for these common signs of Heater Hose damage / failure:
| INTERNAL DAMAGE |
|
Soft / mushy hose ends, usually about 2 inches from the clamp.
 Internally Damaged Hose |
| LEAKAGE |
|
Moisture, drips or coolant bleed marks on or around the hose clamps, connectors or hose.
 Leaking Hose |
| HEAT DAMAGE |
|
Slight swelling, or a hardened, glossy cover that is covered with cracks.
 Heat Damaged Hose |
| OZONE DAMAGE |
|
Tiny, parallel cracks in the cover, usually at hose bends.
 Ozone Damaged Hose |
| ABRASION DAMAGE |
|
Rubbing marks on, or damage to the hose cover.
 Abrasion Damaged Hose |
| OIL CONTAMINATION |
|
Soft or spongy to the touch - bulges and swelling are readily apparent.
 Oil Contaminated Hose |
|
| OEM / Interchange Numbers: 68199254AA, 68199254AB |
|
