Brake Pads are sold as a set. Quantity of one (1) is for both wheels
R1 Concepts Ceramic Series brake pads are made of ceramic materials that are pressure-adhered within the brake-pad compound. For vehicles that stop on a dime - without any unpleasant sounds - ceramic brake pads offer the best.
Features:
Ceramic formula provides stable friction performance across a wide temperature range, excellent fade resistance and low dust
Brake pad underlayer minimizes heat transfer from the pad to the caliper, reducing the possibility of fluid boil
Installation Tips
Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function
Attention California Customers - This product contains Antimony Oxide and other chemicals which is known in the State of California to cause cancer ( or reproductive problems).
R1 CONCEPTS Warranty Information:12 months/12,000 miles
Installation Tips
Videos