|
STANDARD MOTOR PRODUCTS S20489
|
|
$27.79
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$27.79
Total
|
|
|
|
|
|
|
|
|
Features & Benefits:
- 100% NEW components, never remanufactured
- Gear train components designed to maximize durability and withstand harsh operating conditions.
- Includes a temperature resistance silicone gasket
- Our validation process includes 200+ hours of vibration testing, 1000+ hours of extreme heat and cold operational testing and on-vehicle testing to ensure optimum performance in all conditions
- Specifically designed and tested for domestic vehicles
- We maintain complete quality control throughout the process. Each component is assembled and calibrated to precisely match OE output voltages, ensuring a smooth relearning process.
- We use sealed ball bearings, limiting airflow leakage and reducing mass air-flow errors readings.
Experiencing Acceleration or Idling Issues? It Might Not be the Throttle Body!
Poor acceleration, hesitation and other idling issues can be caused by failure of a variety of parts. Use the chart below to help determine which part is causing the problem.
| Part | System | Other Symptoms |
|---|
| Throttle Body | Fuel & Air | |
| Mass Air Flow Sensor | Exhaust & Emission | - Difficulty Starting or Turning Engine
|
| Air Filter | Fuel & Air | - Dark Filter Media
- Debris in Filter or Filter Box (Change every year!)
|
| Fuel Injector | Fuel & Air | |
| Vacuum Hose / Connector | Hoses / Lines & Clamps | - Hissing, Squealing or Sucking Sound from Cracked Connector or Hose (Use a Vacuum Tester)
|
|
Spark Plug or Spark Plug Wire or Ignition Coil
| Ignition | - Increase in Exhaust Emissions
- Visible Wire Damage
- Oil Leak
|
| Accelerator Pedal Position Sensor | Interior | - Limp Mode
- No / Delayed Pedal Response
|
 Installation Tips - Perform OEM Recommended idle relearn procedure. Some applications may require the use of an OBD Scan Tool while others may refer to the Owners Manual.
- A relearn of idle values can be forced by disconnecting the negative battery cable for several minutes in order to clear the electronic control module's memory.
- Several minutes of idling and highway driving may be necessary to relearn idle values. Electrical loads such as headlights, AC, radio, etc. should be turned off while relearning.
- Erratic idle or engine surging after installation of replacement unit may be resolved by putting a load on the engine. If idle evens out after shifting into gear, shift back into park and check idle RPM - perform relearn again if a drivability condition is present.
- Clean intake manifold mounting surface and replace Intake Manifold Gasket, if necessary.
- Inspect Air Cleaner Intake Hose for cracks and proper sealing - replace or repair with Multi-Purpose Sealant, if necessary.
- Check harness for broken wires and wiggle connector to try and reproduce the problem. Replace or clean Connector, if necessary.
- Clear all diagnostic trouble codes from vehicle computer prior to idle relearn.
|
| OEM / Interchange Numbers: 2C3Z9E926AA, YC2Z9E926AA |
STANDARD MOTOR PRODUCTS Warranty Information:Ignition Control Modules (except T-Series): 5 years / 50,000 miles; Intermotor Wire Sets: Limited Lifetime; T-Series Parts: 1 year / 12,000 miles; TechSmart Tools: 1 year from date of purchase; All Other Parts: 3 years / 36,000 milesWarranty Details |
|
