RAYBESTOS 980978R2
|
|
$24.79
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$24.79
Total
|
|
|
|
|
|
R-Line+; Painted Hat & Edge For Rust Resistance |
Raybestos R-Line+ painted rotors use a resin-modified material that is chemically resilient. The painted hat and edges help resist corrosion.Features:- Painted hat & edges provides corrosion resistance
- Superior surface finish for consistent braking
- OE vane design and plate thickness for heat capacity and strength
- Advanced metallurgy for structural strength and heat transfer
- Low initial lateral run-out and disc thickness variation for smooth, vibration free braking
- Precision balance for vibration free performance
Installation Tips - Always replace Brake Pads and inspect Calipers and Brake Hoses when installing new rotors
- Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
- After removing the old rotor, clean the hub face with a Wire Brush to remove rust buildup and apply Copper Anti Seize to prevent future buildup. Rust or debris on the hub can cause rotor runout and lead to wheel vibration
- Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
- Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
- Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
- After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function
|
OEM / Interchange Numbers: 517120U000, 517121W200, 517121W250 |
RAYBESTOS Warranty Information:Limited Lifetime: All products except R-Line Calipers. 18 Months / 18,000 Miles: R-Line Calipers. Warranty covers defects in materials and workmanship. Normal/uneven wear is not covered. |
|