|
BREMBO KT08015
|
|
$251.79
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$251.79
Total
|
|
|
|
|
|
| BREMBO KT08015 Specifications |
|---|
| Brake System | Akebono | | Features | With accessories | | Height (MM) | 32 / 41 | | Minimum Thickness (MM) | 8.4 | | Nominal Thickness (MM) | 10 / 15 /16 | | Pad Wear Sensor Included | Yes | | Width (MM) | 100.00 |
|
|
Brembo is the first manufacturer to produce a special copper free friction material dedicated to electric cars, and rotors with a special anti-corrsion treatment on the braking surface, that lasts over time.
Features & Benefits:
- Better for the environment
- Better Performance, more sustainability
- Dedicated solution for electric cars
- Protects against oxidation, with no rust, less dust
 Installation Tips - Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
- Before installing the rotor, clean the hub face with a Wire Brush to remove rust buildup and apply Copper Anti Seize to prevent future buildup. Rust or debris on the hub can cause rotor runout and lead to wheel vibration
- Apply brake lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
- Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
- Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
- After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function
|
| OEM / Interchange Numbers: 58302AZA00, 58302K4A10, 58411D4650 |
BREMBO Warranty Information:24 Months/24,000 Miles |
|
