OE Equivalent Solid Rotors; With Low-Metallic Pads
Rotor Features & Benefits:
Solid in construction, each rotor is vented to dissipate heat evenly and efficiently
Machined and tested for a secure fitment
Assembled and carefully tested to endure rigorous road conditions
Durable construction for repetitive usage and extended life
Pad Features & Benefits:
Carefully selected low-metallic pad compounds improve stopping distances and improve overall pad grip
Designed to reduce noise and vibration levels, making your daily commute as comfortable as possible
Improved temperature resistance up to 660/750°F (350/400°C) to eliminate brake fade
Specifically developed to enhance brake performance of premium European vehicles
Feature advanced solutions, patented by Brembo, to minimize noise and vibrations
Approved in accordance with UN ECE R90 regulations
Installation Tips
Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
Before installing the rotor, clean the hub face with a Wire Brush to remove rust buildup and apply Copper Anti Seize to prevent future buildup. Rust or debris on the hub can cause rotor runout and lead to wheel vibration
Apply brake lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function
Installation Tips
