Z26 Street Warrior; Includes Drilled & Slotted Rotors, Carbon-Fiber Ceramic Pads & Hardware
The Z26 Street Warrior Brake Upgrade Kit is recommended for high performance, high horsepower muscle and modified cars. This brake pad and rotor kit comes with everything you need, including premium stainless steel hardware, for an easy, bolt-on installation. Power Stop's Drilled & Slotted rotors and Carbon-Fiber Ceramic pads combine to provide shorter stops under the most demanding conditions. The PowerStop Z26 Street Warrior Performance Upgrade Brake Kit is the only bolt-on upgrade that delivers more than just the braking power you need to rein in all those ponies, though. With our low dust and noise formula, you'll spend less time cleaning those wheels and more time enjoying what matters most – the drive.
Features & Benefits:
Carbon-Fiber Ceramic Brake Pads provide extreme duty stopping power muscle cars & high performance vehicles demand
Precision drill holes allow for maximum rotor cooling, keeping your brake temperatures down during extreme conditions
Rounded rotor slots wipe away gas and debris, keeping a clean pad contact patch for safe, smooth braking
Silver Zinc rotor plating for long lasting protection from rust and corrosion with a killer look behind open wheels
Premium stainless steel hardware and pin bushings included where applicable for problem-free installation
Installation Tips
Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
Before installing the rotor, clean the hub face with a Wire Brush to remove rust buildup and apply Copper Anti Seize to prevent future buildup. Rust or debris on the hub can cause rotor runout and lead to wheel vibration
Apply brake lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function
Product Highlight: Z26 Street Warrior Upgrade Brake Kit
Tech Tip: How To Apply Brake Lube
Tech Tip: How To Install A New Set of Brake Pads & Rotors
Tech Tip: How To Prepare the Wheel Hub When Installing a Rotor
Quantity
Components that come in this kit
1
Rotor
POWER STOPExtreme Performance Drilled and Slotted; PairInfo
POWER STOP
1
Rotor
POWER STOPExtreme Performance Drilled and Slotted; PairInfo
1
Brake Pad
POWER STOPZ26 Street Warrior; Carbon-Fiber Ceramic; Includes HardwareInfo
POWER STOP
1
Brake Pad
POWER STOPZ26 Street Warrior; Carbon-Fiber Ceramic; Includes HardwareInfo
POWER STOP
Attention California Customers - WARNING: This product can expose you to chemicals including Arsenic, Cadmium, Chromium (Hexavalent compounds), Antimony Trioxide, Lead, Nickel, Cobalt and Carbon (Black), which are known to the State of California to cause cancer, and Arsenic, Cadmium and Chromium (Hexavalent compounds) which are known to the State of California to cause birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov.
Installation Tips
Videos
