|
DELPHI TA1215
|
|
$11.64
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$11.64
Total
|
|
|
|
|
|
| DELPHI TA1215 Specifications |
|---|
| Adjustable | No | | Bearing Material | Plastic | | Color | Black | | Cone Outside Diameter (MM) | 15.56 | | Dust Boot | Yes | | Dust Boot Material | Choloroprene Rubber (CR) | | End 1 Gender | Male | | End 1 Thread Diameter (IN) | 0.394 | | End 1 Thread Diameter (MM) | 10.0 | | End 1 Thread Direction | Clockwise (Right) | | End 2 Gender | Male | | End 2 Thread Diameter (IN) | 0.551 | | End 2 Thread Diameter (MM) | 14.0 | | End 2 Thread Direction | Clockwise (Right) | | End 2 Thread Pitch (MM) | 1.5 | | Finish | Coated | | Greasable | No | | Grease Fitting Included | No | | Height (MM) | 71.0 | | Housing Material | Steel | | Length Stud Center to End (IN) | 9.055 | | Length Stud Center to End (mm) | 230.0 | | Mounting Hardware Included | Yes | | Position(s) | Right | | Pre Greased | Yes | | Stud Type | Threaded | | Tie Rod Material | Steel | | Tube Diameter (in) | 0.709 | | Tube Diameter (mm) | 18.0 | | Type | BENT | | Weight (lb) | 1.47 | | Width (MM) | 53.0 |
|
|
Features:- Extensive dimensional and material analysis to ensure the very best compatibility to the Original Equipment (OE) part
- Tested alongside the OE part for 250,000 cycles to check braking force, cornering force and suspension travel movement, to ensure the part performs like the OE
- Able to withstand temperatures below -40ºC and over 120ºC, helping to ensure they perform even under the harshest conditions
- Parts exposed to 720 hours of salt spray for optimum protection against corrosion
- Additional cataphoretic coating for greater protection against corrosion and enhanced aesthetics
Attention California Customers - WARNING: This product can expose you to chemicals including Carbon Black, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
|
| OEM / Interchange Numbers: 381722, 381727, 381749 |
Warranty Information:Limited Lifetime |
|
