|
BECK/ARNLEY 0833387
|
|
$38.79
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$38.79
Total
|
|
|
(Only 1 Remaining)
|
|
|
| BECK/ARNLEY 0833387 Specifications |
|---|
| Bolt Hole Center To Center Length | 114.2 mm | | Height | 65.3 mm | | Hub Outside Diameter | 157.5 MM | | Lug Hole Diameter | 12.6 mm | | Lug Quantity | 5 | | Minimum Thickness | 20 mm | | Rotor Center Bore Inside Diameter | 77 mm | | Rotor Inside Diameter | 146 mm | | Rotor Outside Diameter | 275.5 mm | | Rotor Thickness | 21.8 mm | | Rotor Type | N | | Vented | Y |
|
|
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Their product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Features & Benefits:
- Directional finish optimizes break-in and pad seating
- High carbon content maximizes thermal conductivity
- High temp coating on exposed surfaces improves appearance
 Installation Tips - Always replace Brake Pads and inspect Calipers and Brake Hoses when installing new rotors
- Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
- After removing the old rotor, clean the hub face with a Wire Brush to remove rust buildup and apply Copper Anti Seize to prevent future buildup. Rust or debris on the hub can cause rotor runout and lead to wheel vibration
- Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
- Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
- Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
- After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function
Attention California Customers - WARNING: THIS PRODUCT CAN EXPOSE YOU TO CHEMICALS, WHICH IS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER AND REPRODUCTIVE HARM. FOR MORE INFORMATION, GO TO WWW.P65WARNINGS.CA.GOV.
|
| OEM / Interchange Numbers: FB0533251A |
|
