ENGINETECH
More Information for ENGINETECH BC427J
{Alternate Inventory Numbers: BC427J.50, BC427J.25, BC427JSTD, BC427J.75}
Continue Shopping
 
ENGINETECH BC427J  
Choose Size Below
Price
Core
Pack
Total
Choose Size:
  •  
  • 0.50MM Undersize ($20.79) Warehouse
  • Standard ($20.79) Warehouse
  • 0.25MM Undersize ($21.79) Warehouse
  • 0.75MM Undersize ($21.79) Warehouse
ENGINETECH BC427Jclose
<
>
Part image
ENGINETECH BC427J Specifications
Maximum Clearance0.0004-0.0029
Maximum Housing Inside Diameter2.7161-2.7169
Position1-2-3-4
Shaft Diameter2.4997-2.5004
Shell Part NumberMB3596P
Wall Thickness0.1073-0.1078
Width0.737
Set
Enginetech main & rod bearings have been the choice of rebuilders for over 25 years. About ten years ago, when aluminum bearings were first being introduced, Enginetech continued to produce the higher quality tri-metal 780 bearings. Enginetech stuck firm with the 780 tri-metal material for years because it was far superior to the early aluminum bearing technology.

Advanced technology in the last few years has produced huge improvements in aluminum bearings. The additions of high amounts of silicon dispersed within aluminum alloys have moved aluminum-silicone bearing material to the preferred bearing status. The performance of new aluminum-silicone alloys is now equal to or better than the original tri-metal designs. Due to the new advances in aluminum-silicon bearing technology Enginetech is converting most of our main & rod bearings to the advanced aluminum-silicon material.

Attention California Customers - Warning: This product may expose you to chemicals including lead and nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

OEM / Interchange Numbers: 7382MA

ENGINETECH Warranty Information:
Stock / Standard Replacement Parts: 12 months / 12,000 miles; High Performance Parts: No Warranty
Warranty Details