Features & Benefits

• Factories are ISO certified and are OE suppliers to many US, German and Asian manufacturers
• 100% leak tested before leaving factory at 150% of operating pressure for long life and proper performance
• All components are installed, torqued, & tested on Radiator during assembly
• Tanks are made from Virgin Grade Engineered plastic resins, which are "Glass Filled" for added Strength & Durability
• Gaskets are made from Special Grade "EPDM" rubber to withstand extreme temperatures
• High Performance "Multi-Louvered Design" Fins

• Vibration Cycle Test
• Thermal Cycle Test
• Wind Tunnel Test for optimal radiator core cooling efficiency
• Burst Pressure and Impulse Cycle tested for strength
• Salt Spray Tested for corrosion protection
• 10 Foot Box "Drop Test" to ensure packaging protection
• 30 Point Fit Inspection on critical dimensions to ensure OE fit with no modifications necessary

Cooling System Maintenance | Tips & Tools

Without regular maintenance, cooling system components will degrade and fail prematurely, which can lead to costly engine damage. Protect your engine with simple preventative maintenance:

• Completely drain and flush the system using Cooling System Flush prior to installation. Flushing the system is critical to prevent system contamination and failure.
• Consider replacing the Radiator Hoses (and Hose Clamps), Thermostat and Radiator Cap as part of routine preventative maintenance. System contamination can cause these parts to degrade and fail over time, which can lead to severe engine damage from overheating.
• Refill radiator with fresh Coolant / Antifreeze according to the volume and formula specified in your Owner's Manual. Inspect levels and condition every year.

Videos