BSE markets and sells their products under both BSE and Blue Streak Electronics. The product inside the box is the same, no matter what brand name appears on the box.
Complete Assembly
BSE NEW Mass Airflow Sensor lineup uses CERAMIC PCBs to provide the best product with added enhancements.
Features & Benefits:
Resistors are digitally calibrated for optimal precision
Superior thermal stability under even the most extreme under-the-hood temperature changes
Higher consistency in voltage readings at all rpms
More efficient heat dissipation to extend the service life of the component
Double binding for improved sensor reliability
Replacing the Complete Housing Assembly instead of the Sensor Only ensures the connector air tubes are clean and protects the sensor element, which can be damaged by air pollution or oils on your hands.
Check for Vacuum Leaks First!
Vacuum leaks present symptoms similar to a faulty MAF Sensor. When replacing the MAF, always check for vacuum leaks, too. Common sources include:
Leaking Intake Manifold Gasket (found in the "Engine" category) - Vacuum Gauge readings below 17-22 in-Hg (normal manifold vacuum at sea level) at idle may indicate an intake manifold gasket leak.
Note: As elevation increases, readings decrease. Subtract 1 in-Hg from normal manifold vacuum reference for every 1,000 feet increase in elevation above 2,000 feet.
Stuck open PCV Valve - remove the PCV Valve and gently shake it; if it does not rattle, the valve is clogged or dirty and should be replaced.
Cracked Intake Boot (found in the "Engine" category)
Closeout Inventory Warranty Information:Wholesaler Closeout items have a 30 day warranty (but still are covered by our Return Policy).BSE Regular Inventory Warranty Information:1 Year (Unlimited Miles)
Check for Vacuum Leaks First!
Videos
Additional Resources
RockAuto Newsletter: