|
HUSKY SPRING USB011S
|
|
$9.29
Precio
|
$0.00
Depósito
|
+ Vendido en Paquetes de 1x1
Empacar
|
$9.29
Total
|
|
|
|
|
|
| Especificaciones de HUSKY SPRING USB011S |
|---|
| Curva Forma | Cuadrado | | Grado de Pernos | Grado 5 | | Color | Acero Gris | | Contenidos | 1 Perno en U, 2 tuercas, 2 Arandelas por Juego | | Tuercas Profundas y Grosor Endurecido Arandelas Incluido | Sí | | diámetro (pulg.) | 1/2 | | Material | Acero | | Longitud Total (Pulg.) | 6-3/4 | | Contrahuela bloquea Incluido | No | | Forma | Cuadrado | | Tamaño de Rosca | 1/2-20 Roscas por pulgada | | Tipo de Rosca | NF | | Perno en U Incluido | Sí | | Ancho (pulg.) | 2-5/16 |
|
|
Qty 1 Steel U-bolt with 2 deep nuts and 2 thick hardened washers. Two kits needed per spring.
Important note: Always retorque newly installed u-bolts after 20 miles of service. If they have lost noticeable torque, retorque again after 1 day. Continue rechecking until the u-bolts hold torque. (Loss of torque value is usually from settling of the stack of components being clamped together) This is a very important practice because loose u-bolts will cause spring breakage through the center hole, possible shifting of the axle with resulting damage and safety issues!
|
Información de Garantía:No Tiene Garantía |
|
