More Information for CENTRIC 10600080

{Alternate Inventory Numbers: 106.00080, 106-00080}

Continue Shopping

CENTRIC 10600080

$35.79

Price

$0.00

Core

+ Sold in packs of 1x1

Pack

$35.79

Total

Add to Cart

Point to Zoom

Brake Pads are sold as a set. Quantity of one (1) is for both wheels

CENTRIC 10600080 Specifications
Friction Material Bonding Type	Integrally Molded
Friction Material Composition	Semi-Metallic
Inner Pad Height (IN)	2.984
Inner Pad Height (MM)	75.800
Inner Pad Width (IN)	6.213
Inner Pad Width (MM)	157.800
Mounting Hardware Included	Yes
Outer Pad Height (IN)	2.984
Outer Pad Height (MM)	75.800
Outer Pad Width (IN)	6.213
Outer Pad Width (MM)	157.800
Pad Quantity	4
Pad Shims Included	Yes
Pad Wear Sensor Included	No
Prepared For Pad Wear Sensor	No

Posi-Quiet Extended Wear; Semi-Metallic; Includes Hardware

Posi Quiet Extended Wear Brake Pads are manufactured using the same positive molding process utilized by Original Equipment suppliers. With these pads, you will experience excellent braking performance coupled with the assurance that your brakes will last for many miles.

Features & Benefits:

Long wearing Semi-Metallic friction formula
Stable friction performance across a wide temperature range, particularly high temperatures
Post cured for consistent performance throughout the service life of the brake pad
Low brake rotor wear
100% scorched for easy bed-in
100% shimmed to minimize noise and vibration
Positive Molded for even wear characteristics
Hardware included, where applicable
100% Asbestos-free formulas

Organic vs. Ceramic vs. Semi-Metallic - What Is The Difference?

A common question many drivers have when shopping for brake pads is �What is the difference between the different brake pad materials?� While all brake pads will stop your vehicle, there are pros and cons of each pad material:

Brake Pad Material	Cost	Dust Level	Noise Level	Stopping Power	Pad Life
Organic	$
Semi-Metallic	$$
Ceramic	$$$

Installation Tips

Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function

Attention California Customers - https://www.p65warnings.ca.gov/

Attention California Customers - WARNING: Cancer and Reproductive Harm

CENTRIC Warranty Information:
90 days/3,000 miles