The Raybestos R-Line Reman Non-Plated Brake Calipers are engineered to deliver safe, leak-free performance.
Features & Benefits:
OE-matched design and specifications
Seals, boots, bleeder screws and o-rings are replaced to guarantee leak free performance
EPDM70 rubber components included for superior heat resistance, performance and durability
Pre-lubricated guide pins included
Raybestos works tirelessly to ensure their calipers are tested to the highest multinational industry standards to ensure you receive a high quality product. The testing parameters include:
High and low-pressure leak testing
Extreme pressure strength and leak testing
Cyclic durability under extreme temperatures
Piston retraction, fluid displacement and residual drag torque
Rubber aging and degradation resistance
Installation Tips
Always inspect brake pads and rotors when replacing your calipers. Faulty calipers can lead to uneven pad and rotor wear
Inspect or change brake hoses when replacing the caliper. Worn or damaged hoses should be replaced to prevent brake fluid contamination or loss
Use a Brake Fluid Tester to test your brake fluid. If your brake fluid has moisture in it, flush the system before installing the new caliper
Apply Blue Threadlocker to caliper bracket mounting bolts to lock the bolts in place and prevent loosening or backing out
After installing the new caliper, bleed your brakes to ensure no air is trapped in the brake fluid. RockAuto offers a selection of Brake Bleeding Tools to help with this process
After the brakes have been bled, top off the master cylinder reservoir with the proper Brake Fluid
Attention California Customers - Warning: This product can expose you to chemicals including nickel, which is known to the state of California to cause cancer, and lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.