|
GM GENUINE 89059409
|
|
$335.79
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$335.79
Total
|
|
|
|
|
|
| GM GENUINE 89059409 Specifications |
|---|
| Alignment Tool Included | No | | Cable Included | No | | Clutch Diameter (IN) | 11.89 | | Clutch Disc Diameter (IN) | 11.89 | | Clutch Disc Diameter (MM) | 302 | | Clutch Disc Hub Diameter (in) | 2.15 | | Clutch Material | Metal | | Clutch Slave Cylinder Included | No | | Counterweight Assist | No | | Disc Material | Organic | | Disc Type Sprung Solid | Sprung | | Flywheel Bolts Included | No | | Flywheel Included | No | | Grease Included | No | | Input Spline Quantity | 10 | | Mounting Hardware Included | No | | New Or Remanufactured Clutch | New | | Pilot Bushing Included | No | | Pressure Plate Bolt Hole Quantity | 6 | | Pressure Plate Bolts Included | No | | Pressure Plate Type | Diaphragm | | Release Bearing Included | No |
|
|
Stay with the parts brand your General Motors vehicle came with and get the quality you know and trust with GM Genuine parts. GM Genuine parts give you the peace of mind that the fit, form, and function is up to the high standards and specifications of General Motors.
 Tips & Tools For The Job - Wear a Dust Mask to protect against hazardous clutch dust. You can also spray the clutch with water prior to removal to reduce the amount of airborne dust during disassembly.
- Use a Flywheel Turner to hold the flywheel in place while removing and reinstalling the pressure plate bolts.
- Apply Blue Threadlocker to flywheel bolts prior to installation to prevent backing out due to the high vibrations flywheels are subject to.
- Use the provided lubricant to lightly lubricate the splines of the input shaft. Over lubricating the input shaft risks lubricant transfer to the clutch friction disc and can cause clutch slippage.
- Be sure to install the new clutch friction disc in the correct direction. The disc will have a "Flywheel Side" label on one side.
|
Warranty Information:24 Month / Unlimited Mile Warranty |
|
