The aluminum accumulator is assembled using a universal can top which is punched
with the appropriate hole configuration at the point of use. The port and outlet
fittings are welded to the can top. The anti-siphon tube is assembled through
the can into the inlet fitting, then welded in place. The anti-siphon tube is
manufactured in house by cutting the tube to length, assembling the filter,
end forming with the OEM trumpet design, bending, and punching the pickup and
pressure equalization holes. The bottom can is assembled to the top can with
the desiccant bag inside. The two halves are then welded around the outside
of the seam.
After welding is complete the valve cores are assembled in the port fittings
and the unit is checked for leaks. The units are leak tested using a nitrogen
pressure test underwater. Once the accumulators pass leak test, caps are assembled
and each unit individually packed in a cardboard box with o-ring kits.
Attention aux clients en Californie - ATTENTION : Ce produit contient un produit chimique connu par l'État de Californie de causer les anomalies congénitales ou d'autres troubles de la reproduction.
Inventaire de liquidation Informations sur la garantie:Les pièces en liquidation de grossiste ont une garantie de 30 jours (mais toujours sont inclus par notre Politique de reprise).Inventaire standard Informations sur la garantie:120 jours
