Wagner® QuickStop® application-specific brake pads are designed, tested and certified to ensure a vehicle’s braking system will be restored to original equipment performance. They are designed to reduce noise-causing vibration.

Delivering optimal stopping performance, our brake pads are 100% OE post cured for consistent braking. Wagner QS brake pads - the answer for restoring like-new braking performance.

Installation Tips

• Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
• Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
• Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
• Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
• After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function

Additional Resources