• Each unit is 100% computer tested at 3 points in the remanufacturing process for guaranteed performance
• Every motor is assembled with the precise amount of lubricant to ensure quiet operation and long life
• Improved over original performance - Mechanically anchored connectors by way of thru-hole soldering results in stronger, longer lasting electrical connections
• Motor magnets are 100% recharged for superior performance and reliability

If your windshield wipers are not operating, this can be caused by a variety of different parts on the vehicle and mis-diagnosis is common. Read these troubleshooting tips first:

1. With the car off, try to manually move your wiper blades back and forth.
2. If you can move your wiper blades, that may signify a mechanical problem. Inspect your wiper linkage to see if it has separated the wipers from the motor. (To find a replacement Wiper Linkage, click on "Wiper Linkage/Transmission" under the "Wiper & Washer" category.)
3. If you cannot move your wiper blades, disconnect your wiper motor and turn your ignition and wipers on.
4. Test the connector's terminals with an Electrical Tester to see if the motor is receiving power.
5. If the wiper motor is receiving power but not functioning, it is likely a faulty wiper motor.
6. If your motor is not receiving power, you will want to check for blown fuses, bad relays, or broken wires to fix the connectivity issue.

Additional Resources