|
DAYCO PBO81480SC10
|
|
$272.79
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$272.79
Total
|
|
|
|
|
|
| DAYCO PBO81480SC10 Specifications |
|---|
| Bolt Hole Quantity | 9 | | Counterweight Balance | Neutral, no counterweight | | Crank Bore (IN) | 1.481 | | Crank Bore (MM) | 37.60 | | Crank Trigger/Exciter Plate | No | | Hardware Included | No | | Installation Instructions Included | Yes | | Nose Outside Diameter (IN) | 2.128 | | Nose Outside Diameter (MM) | 54.05 | | Number of Integrated Pulleys | 2 | | Outer Ring Material | Steel | | Overall Outside Diameter (IN) | 8.229 | | Overall Outside Diameter (MM) | 209.00 | | Overall Width (IN) | 3.926 | | Overall Width (MM) | 99.70 | | Pulley 1 Number of Grooves | 4 | | Pulley 1 Outside Diameter (IN) | 7.087 | | Pulley 1 Outside Diameter (MM) | 180.000 | | Pulley 1 Type | Serpentine | | Pulley 2 Number of Grooves | 8 | | Pulley 2 Outside Diameter (IN) | 8.087 | | Pulley 2 Outside Diameter (MM) | 205.400 | | Pulley 2 Type | Serpentine | | Ring Width (in) | 2.497 | | Ring Width (MM) | 63.40 | | Timing Marks | Yes | | Woodruff Key Included | No |
|
|
| SC Performance 8 Rib 10% Overdrive |
| PowerBond™ by Dayco® Supercharger Performance Balancers are designed with a unique combination of material and castings providing the maximum strength and durability of bonded dampening rubber. Increasing the diameter of the pulley also increases the speed of the supercharger leading to an increased boost. This helps reduce the need to lower the diameter of the blower pulley resulting in less belt wrap. Note: This balancer have been modified to 8-ribs that will NOT match the original OE balancer. This modified balancer changes the geometry of the original belt drive. Dayco® recommends this balancer to be serviced by a professional installer.
|
Warranty Information:12 Months/12,000 Miles |
|
