FRAM
More Information for FRAM PH3506
Continue Shopping
 
FRAM PH3506  
$4.95
Price
$0.00
Core
+ Sold in packs of 1x1
Pack
$4.95
Total
FRAM PH3506close
<
>
Part image
FRAM PH3506 Specifications
Anti-Drain Back ValveYes
Attachment TypeSpin-on
Burst Pressure310.000
Bypass Relief ValveNo
Filter Media MaterialCellulose/Synthetic Blend
Filter TypeSpin-On Canister
Gasket Inside Diameter (IN)2.469
Gasket Outside Diameter (IN)2.750
Gasket Thickness (IN)0.188
Gasket TypeBase
Height (IN)3.359
Housing ColorOrange
Inlet TypeThreaded
Inside Thread Diameter (IN)13/16-16
Non Slip GripYes
Outside Diameter (IN)2.984
Replaceable FilterYes
ReusableNo
Thread SizeStandard
Torque NutNo
Extra Guard; Spin-On; Includes Gasket; Height=3.36"; Outer Diameter=2.75"; Inner Diameter=2.47"
With 10,000 miles of protection, Extra Guard® is the perfect filter for everyday drivers who perform oil changes at OE recommended intervals. Extra Guard® has cellulose and glass blended media that provides advanced engine protection for your vehicle. Engineered with a silicone anti-drain back valve, Extra Guard® meets all manufacturer's recommended change intervals.

FRAM Extra Guard provides the perfect balance of dirt-trapping efficiency and dirt-holding capacity.

Features & Benefits:

  1. SureGrip: Provides non slip surface for easier installation and removal.
  2. Media: Fiber and resin blend creates a proprietary filter media to capture 95% of dirt particles that cause harmful engine wear.
  3. Anti-Drainback Valve: Silicone anti-drainback valve delivers superior start-up engine protection with up to 3X the hot oil resistance.
  4. Gasket: Internally lubricated sealing gasket for easier filter removal.

Which Oil Filter Is Right For You?

Driving Style
Filter Type Oil Change Intervals Normal City / Highway Heavy Traffic Dirty / Dusty Conditions Extreme Weather Towing
Economy
3,000 - 5,000 Miles        
Standard Replacement
OEM Recommended    
High Performance / Heavy Duty
OEM Recommended

Oil Change Toolbox

Installation Instructions
  • Check owner's manual for correct oil specification, viscosity, and amount. Purchase oil by year, make, and model, or under the Tools & Universal Parts tab on RockAuto.com
  • Wear proper protective gear (safety glasses, gloves, long sleeve shirt) to protect skin and eyes from hot oil.
  • Place a Drain Pan under the crankcase and carefully open drain plug to drain oil. When oil is fully drained, reinstall drain plug on the oil pan.
  • Position the drain pan under the oil filter. Unscrew oil filter (using a Filter Wrench, if necessary).
  • Clean mounting base, making sure the O-ring from the old filter is not stuck to the filter mount.
  • Apply film of clean oil to filter gasket.
  • Screw new filter on until gasket reaches base contact, then tighten filter to manufacturer specifications.
  • Add oil to “full” on dipstick. Idle engine for 5 minutes and check for leaks.
  • Shut off engine and recheck oil level after 5 minutes. Top off as necessary.
It is illegal to dispose of used oil or oil filters in a sanitary landfill or public waterway. Many towns have free hazardous waste drop-off sites, which a quick internet search will help you find.
OEM / Interchange Numbers: 19210283, 25010251, 25010324, 25010325, 25010633, 25010634, 25010792, 25014377, 25014748, 2945611080, 6439857, 8250106330, 8250143770, 8889842150, 88984215, 89017342, PH3429

FRAM Warranty Information:
Filters - Vehicle Manufacturer's Recommended Service Intervals
Hard Parts - 12 Months
Warranty Details