All UltraQuiet Disc Brake Pads are application specific. The designers of your vehicle picked the formula for your vehicle. Why change? UltraQuiet employs seven formulations of ceramic or semi-metallic to create the best stopping performance.

• Positive Molding technology virtually eliminates any burnishing, or break-in, period, and provides smooth, dust-free, noise-free braking
• All applications have the appropriate hardware included. Some implements are attached to the disc pads, while other applications have caliper abutment hardware. All caliper abutment hardware is made with high quality stainless steel.
• UltraQuiet provides the proper electronic wire sensor for each necessary application
• Multi-layered constraint insulators are either staked on or secured with clips. UltraQuiet uses only the highest quality materials to control NVH (Noise/Vibration/Harshness)
• Matched by design, slots and chamfers are utilized for continued performance

Installation Tips

• Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
• Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
• Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
• Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
• After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function