|
ACDELCO 18FR2241
|
|
$39.79
Price
|
$35.00
Core
|
+ Sold in packs of 1x1
Pack
|
$74.79
Total
|
|
[ Wholesaler Closeout -- 30 Day Warranty] (Only 1 Remaining) |
|
|
| ACDELCO 18FR2241 Specifications |
|---|
| Bleeder Thread Diameter | M7x1 | | Caliper Casting Material | Cast Iron | | Caliper Color | Natural | | Caliper Slides Included | Yes | | Caliper Type | Floating | | Casting Material | Cast Iron | | Finish | Plain | | Height (IN) | 6.7 | | Inlet Fitting Type | Female | | Inlet Thread Diameter (IN) | 0.394 | | Inlet Thread Diameter (MM) | 10 | | Length (IN) | 9.5 | | Mounting Bolt Thread Pitch (MM) | 1.250 | | Mounting Bracket Included | Yes | | Mounting Hardware Included | Yes | | Mounting Hole Diameter (IN) | 10 | | Pad Wear Sensor Included | No | | Pads Included | No | | Piston 1 Diameter (IN) | 1.5 | | Piston 1 Diameter (MM) | 38.1 | | Piston 2 Diameter (MM) | 55.88 | | Weight (lb) | 6 | | Width (IN) | 6.7 |
|
|
| Gold / Professional; Reman.; Pads Not Included |
ACDelco Gold (Professional) remanufactured friction ready calipers use both aluminum and iron castings, making them the ideal high quality aftermarket replacement. Developed without attached brake pads, these calipers allow for customization for the application at hand.
Features & Benefits:
- Pressure tested to ensure safe and confident braking
- Cast iron and aluminum specifications; no extra stress on the brake boosting mounting
- Ethylene Propylene (EPDM) rubber components provide superior resistance to heat, corrosion, and leakage
- Developed without attached brake pads for customization
 Installation Tips - Always inspect brake pads and rotors when replacing your calipers. Faulty calipers can lead to uneven pad and rotor wear
- Inspect or change brake hoses when replacing the caliper. Worn or damaged hoses should be replaced to prevent brake fluid contamination or loss
- Use a Brake Fluid Tester to test your brake fluid. If your brake fluid has moisture in it, flush the system before installing the new caliper
- Apply Blue Threadlocker to caliper bracket mounting bolts to lock the bolts in place and prevent loosening or backing out
- After installing the new caliper, bleed your brakes to ensure no air is trapped in the brake fluid. RockAuto offers a selection of Brake Bleeding Tools to help with this process
- After the brakes have been bled, top off the master cylinder reservoir with the proper Brake Fluid
|
| OEM / Interchange Numbers: 19176788 |
Closeout Inventory Warranty Information:Wholesaler Closeout items have a 30 day warranty (but still are covered by our Return Policy).Regular Inventory Warranty Information:24 Month / Unlimited Mile WarrantyWarranty Details |
|
