|
DELPHI HP10250
|
|
$403.79
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$403.79
Total
|
|
|
|
|
|
| The float arm (where pictured) may ship detached to prevent damage in transit. To connect, simply snap the wire end into the sender hole. |
| DELPHI HP10250 Specifications |
|---|
| Average Current Draw (68) | 9 | | Average Flow Rating GP | 33 | | Fuel Level Sender Assembly Included | Yes | | Fuel Type | Gas | | Gasket or Seal Included | Yes | | In Tank or External | In Tank | | Inlet Type | Strainer | | Internal Or External Strainer | External | | Maximum Pressure (PS) | 65.0 | | Outlet Outside Diameter (IN) | 0.313 | | Outlet Quantity | 3 | | Outlet Type | Quick Connect | | Package Contents | Fuel Pump Hanger Assembly w/Float Arm,(8) Nuts, Seal, Instruction Sheet | | Pump Type | Electric | | Resistance Ohms Empty (82) | 51.0 | | Resistance Ohms Full (82) | 2.0 | | Strainer Included | Yes | | System Pressure | 34 psi | | Terminal Gender | Male | | Terminal Quantity | 6 | | Terminal Type | Blade | | Voltage (2H) | 12.0 |
|
|
Delphi holds more than 30 OE proprietary innovations and 150 patents in fuel module and pump design. All pumps are tested for durability up to 150,000 miles. Delphi OE engineering and testing processes enable them to create smart, durable, electric fuel pumps with features that resist failure.
Features & Benefits:
- Increased terminal size and enhanced connectors eliminate excessive electrical resistance, improve heat dissipation and boost current flow capacity
- OE fuel vapor pressure sensor confirms the EVAP emissions system is performing to specifications
- Fill limit vent valve vents fuel tank and shuts off tank fill nozzle
- Integrated fuel pressure regulator maintains pressure at fuel rail
- High durability gold compound fuel level sensor for improved long-term sensor integrity
- Patented Gen IV turbine pump provides better pumping with less energy use and withstands today's harsh alcohol fuel blends
- OE-testing insures the pump can withstand extreme temperatures ranging from -25 to 150F
- Tested in corrosive, contaminated E22 and E95 fuel blends to ensure long life
Distinctly Delphi Fuel Pump Upgrades:
- Anodized aluminum can reduce flow loss by up to 100% in severe contamination
- New carbon commutator extends fuel pump life by up to 300% over commonly used copper commutators by reducing oxidation and premature wear*
- Over-molded armature protects pump windings in corrosive environments
- Button style contacts feature additional wear material that can last for over 1 million cycles
- High capacity synthetic mesh inlet filter is able to filter out all items larger than 30 microns
 Benefits of Purchasing a Fuel Pump & Housing Assembly Purchasing just the fuel pump is less expensive up-front, but a complete Fuel Pump & Housing Assembly provides added benefits:
- Extend Service Life: New strainer(s), hoses, sensors and other components help resolve problems that could be caused by more than just the pump.
- Reduce Install Time: Since you don't have to disassemble the housing, which could lead to damage, replacement becomes a simple swap, dramatically reducing installation time.
- Save Money: The cost of the assembly is often cheaper than buying the components individually, and means you only have to do the job once.
 Prevent Premature Fuel Pump Failure Preventing premature fuel pump failure is far less expensive and time consuming than continuing to replace the pump. There are three common causes for premature fuel pump failure:
| ELECTRICAL ISSUES |
Poor electrical connections will mimic symptoms of a failed pump, sometimes resulting in unnecessary replacement. Before replacing the pump:
- Use a Fuel System Tester to test pump pressure is within expected range
- Use an Electrical Tester to test for bad wiring, burnt or corroded connectors
- Check / Replace faulty Fuse(s) and Relay
BEFORE REPLACEMENT |
| FUEL CONTAMINATION |
Dirt, rust or debris in the fuel can clog strainers and stick to internal pump components. When replacing the pump:
- Replace Fuel Filter or Fuel Strainer
- Empty and clean the tank with Fuel Tank Cleaner
- Fill tank with fresh, uncontaminated fuel of appropriate grade
DURING REPLACEMENT |
| PUMP DAMAGE / OVERHEATING |
Running low on gas causes your fuel to heat up quicker, and your pump to work harder. After replacing the pump:
- Maintain at least 1/4 tank of fuel and use a Fuel Additive / Conditioner to keep pump cool and lubricated
- If vehicle is stored without use, drain tank to prevent pump corrosion from fuel oxidation
AFTER REPLACEMENT |
Attention California Customers - WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov.
|
| OEM / Interchange Numbers: 42021FE080, 42021FE100, 42021SA020, 42021SA07, 42021SA070 |
Closeout Inventory Warranty Information:Wholesaler Closeout items have a 30 day warranty (but still are covered by our Return Policy).Regular Inventory Warranty Information:Limited Lifetime |
|
