STANDARD MOTOR PRODUCTS
STANDARD MOTOR PRODUCTS
More Information for STANDARD MOTOR PRODUCTS S20005
{Alternate Inventory Numbers: S20005:8}
Continue Shopping
 
STANDARD MOTOR PRODUCTS S20005  
$67.79
Price
$0.00
Core
+ Sold in packs of 1x1
Pack
$67.79
Total
Choose
STANDARD MOTOR PRODUCTS S20005close
<
>
Part image
STANDARD MOTOR PRODUCTS S20005 Specifications
Connector GenderFemale
Contents1 Throttle Body
Gasket or Seal IncludedNo
Idle Air Control Motor IncludedNo
Mounting Hardware IncludedNo
Terminal GenderMale
Terminal Quantity6
Terminal TypePin
Qualities that have made SMP an industry leader for more than 95 years, innovation, engineering expertise, superior quality, meticulous testing, unmatched customer service, competitive pricing, and brand integrity, are at the heart of every TechSmart part.

Features & Benefits:
  • 100% NEW, never remanufactured, which maximizes performance and extends service life
  • Undergoes extensive testing to ensure quality and reliability out of the box
  • Matches OE response time for peak performance on drive by wire systems
  • All TechSmart® parts meet or exceed OE performance, providing today's technician with the quality parts needed to get the job done right, the first time
Videos

Electronic Throttle Body Diagnostic and Replacement Tips
Experiencing Acceleration or Idling Issues? It Might Not be the Throttle Body!

Poor acceleration, hesitation and other idling issues can be caused by failure of a variety of parts. Use the chart below to help determine which part is causing the problem.

PartSystemOther Symptoms
Throttle BodyFuel & Air
Mass Air Flow SensorExhaust & Emission
  • Difficulty Starting or Turning Engine
Air FilterFuel & Air
  • Dark Filter Media
  • Debris in Filter or Filter Box (Change every year!)
Fuel InjectorFuel & Air
Vacuum Hose / ConnectorHoses / Lines & Clamps
  • Hissing, Squealing or Sucking Sound from Cracked Connector or Hose (Use a Vacuum Tester)
Spark Plug or Spark Plug Wire or Ignition Coil Ignition
  • Increase in Exhaust Emissions
  • Visible Wire Damage
  • Oil Leak
Accelerator Pedal Position SensorInterior
  • Limp Mode
  • No / Delayed Pedal Response
Installation Tips
  • Perform OEM Recommended idle relearn procedure. Some applications may require the use of an OBD Scan Tool while others may refer to the Owners Manual.
    • A relearn of idle values can be forced by disconnecting the negative battery cable for several minutes in order to clear the electronic control module's memory.
    • Several minutes of idling and highway driving may be necessary to relearn idle values. Electrical loads such as headlights, AC, radio, etc. should be turned off while relearning.
    • Erratic idle or engine surging after installation of replacement unit may be resolved by putting a load on the engine. If idle evens out after shifting into gear, shift back into park and check idle RPM - perform relearn again if a drivability condition is present.
  • Clean intake manifold mounting surface and replace Intake Manifold Gasket, if necessary.
  • Inspect Air Cleaner Intake Hose for cracks and proper sealing - replace or repair with Multi-Purpose Sealant, if necessary.
  • Check harness for broken wires and wiggle connector to try and reproduce the problem. Replace or clean Connector, if necessary.
  • Clear all diagnostic trouble codes from vehicle computer prior to idle relearn.
Additional Resources

Instruction Form GF10896B
TechSmart Throttle Body Competitive Analysis
OEM / Interchange Numbers: 12567376

Closeout Inventory Warranty Information:
Wholesaler Closeout items have a 30 day warranty (but still are covered by our Return Policy).

Regular Inventory Warranty Information:
36 Months / 36,000 Miles
Warranty Details