GATES
More Information for GATES 33508
{Alternate Inventory Numbers: 169}
Continue Shopping
 
GATES 33508  
$4.50
Price
$0.00
Core
+ Sold in packs of 1x1
Pack
$4.50
Total
GATES 33508close
<
>
Part image
GATES 33508 Specifications
DesignReverse Poppet
Flange Height (IN).694
Gasket Quantity0
Height (IN)1.474
Height Between Flanges (in).78
Installation Tool IncludedNo
Jiggle Pin Check Valve Quantity0
Jiggle Pin Weep HoleNo
MaterialSteel, copper
Seal Quantity0
Sealing Flange Outside Diameter (IN)2.121
Start to Open Temperature (C)82
Start to Open Temperature (F)180
TypeEconomy Thermostat
180 Degree; Economy

Quality controlled factory calibration assures accuracy of opening and closing, regardless of pressure changes.

  • Positive piston heat motor provides accurate temperature control.
  • Sturdy metal construction throughout.
Which Thermostat Is Right For You?

Type Lifespan Flow Rate Precise Temperature Control Fail-Safe Engine Protection
Economy
Standard Replacement
★★ ★★
Performance
★★ ★★ ★★
Heavy Duty ★★★ ★★ ★★★
Premium
★★ ★★
What Temperature Thermostat Do I Need?

Thermostats have a “rated” temperature (such as 180F or 195F). This is the temperature the thermostat will start to open, releasing heated coolant from the engine into the radiator. The thermostat will fully open once the coolant gets another ten or fifteen degrees warmer.

OE TEMPERATURE

These thermostats match the OEM-specified temperature rating for the vehicle. Manufacturers recommend an OE temperature thermostat for most engines, especially for:

  • Modern engines with computers that use the coolant temperature to help control the fuel, emissions and other important systems

ALTERNATE TEMPERATURE

These thermostats have a temperature rating below (cooler than) the OEM-specified temperature rating for the vehicle. This option may make sense for use in:

  • Modified Engines
  • Performance Applications
  • Older / Classic Vehicles
Cooling System Maintenance | Tips & Tools

Without regular maintenance, cooling system components will degrade and fail prematurely, which can lead to costly engine damage. Protect your engine with simple preventative maintenance:

  • Completely drain and flush the system using Cooling System Flush prior to installation. Flushing the system is critical to prevent system contamination and failure.
  • Consider replacing the Radiator Hoses (and Hose Clamps) and Radiator Cap as part of routine preventative maintenance. System contamination can cause these parts to degrade and fail over time, which can lead to severe engine damage from overheating.
  • Refill radiator with fresh Coolant / Antifreeze according to the volume and formula specified in your Owner's Manual. Inspect levels and condition every year.
Additional Resources

Understanding Coolant Technology and Selection
OEM / Interchange Numbers: 12323752, 83501426, 83501426AD, 94336069, AT10239

GATES Warranty Information:
Limited Lifetime
Warranty Details