DAYCO
More Information for DAYCO 81051
Continue Shopping
 
DAYCO 81051  
$9.89
Price
$0.00
Core
+ Sold in packs of 1x1
Pack
$9.89
Total
DAYCO 81051close
Part image
Flex; Two Piece Hose
Precision molded in standard lengths, the DaycoŽ Flex Radiator Hose is designed to replace straight or molded radiator hoses.

Features & Benefits:
  • Knitted reinforcement and synthetic EPDM construction
  • This hose is designed to prevent splitting, ballooning, and elongation; and, resists ozone and other detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C).
  • The corrugations provide excellent hose flexibility without flattening or collapse.
  • Meets SAE J20R4, Class D-2 requirements.
Note: This hose is NOT suitable for fuel or oil transfer.
Service Tip: Squeeze along the hose and feel for inconsistencies; replace any hose that is soft, spongy or crunchy.
Signs it is Time to Replace Your Radiator Hose(s)

Prevent system contamination and coolant leaks that could cause your engine to overheat by checking for these common signs of Radiator Hose damage / failure:

INTERNAL DAMAGE

Soft / mushy hose ends, usually about 2 inches from the clamp.

Internally Damaged Hose
Internally Damaged Hose
LEAKAGE

Moisture, drips or coolant bleed marks on or around the hose clamps, connectors or hose.

Leak Damaged Hose
Leaking Hose
HEAT DAMAGE

Slight swelling, or a hardened, glossy cover that is covered with cracks.

Heat Damaged Hose
Heat Damaged Hose
OZONE DAMAGE

Tiny, parallel cracks in the cover, usually at hose bends.

Ozone Damaged Hose
Ozone Damaged Hose
ABRASION DAMAGE

Rubbing marks on, or damage to the hose cover.

Abrasion Damaged Hose
Abrasion Damaged Hose
OIL CONTAMINATION

Soft or spongy to the touch - bulges and swelling are readily apparent.

Oil Damaged Hose
Oil Contaminated Hose
Cooling System Maintenance | Tips & Tools

Without regular maintenance, cooling system components will degrade and fail prematurely, which can lead to costly engine damage. Protect your engine with simple preventative maintenance:

  • Completely drain and flush the system using Cooling System Flush prior to installation. Flushing the system is critical to prevent system contamination and failure.
  • Consider replacing the Thermostat and Radiator Cap as part of routine preventative maintenance. System contamination can cause these parts to degrade and fail over time, which can lead to severe engine damage from overheating.
  • Refill radiator with fresh Coolant / Antifreeze according to the volume and formula specified in your Owner's Manual. Inspect levels and condition every year.
Additional Resources

Hose Replacement Tips
OEM / Interchange Numbers: 1005614, 1082A64H03, 1602144, 436894, 972F239, BH649, JE2612185

Warranty Information:
12 Months/12,000 Miles