FVP
More Information for FVP 339180
Continue Shopping
 
FVP 339180close
<
>
Part image
FVP 339180 Specifications
Bypass Diameter1.38 IN
Bypass Length1.97 IN
Flange Thickness0.05 in
Gasket or Seal IncludedYes
Gasket/Seal MaterialRubber
Installation Tool IncludedNo
Jiggle Pin Weep HoleYes
Number of Seals1
Sealing Flange Outside Diameter2.11 IN
Temperature (Degree F)180
Standard; Includes thermostat and seal
Features & Benefits:
  • Manufactured with OEM quality materials and safety standards by an OE Supplier
  • Stands up to even the most demanding automotive cooling systems
  • Copper case and wax compound assures rapid response to temperature changes in the coolant
  • Offset design, air relief valve, and OEM style seals included where applicable
Which Thermostat Is Right For You?

Type Lifespan Flow Rate Precise Temperature Control Fail-Safe Engine Protection
Economy
Standard Replacement
★★ ★★
Performance
★★ ★★ ★★
Heavy Duty ★★★ ★★ ★★★
Premium
★★ ★★
What Temperature Thermostat Do I Need?

Thermostats have a “rated” temperature (such as 180F or 195F). This is the temperature the thermostat will start to open, releasing heated coolant from the engine into the radiator. The thermostat will fully open once the coolant gets another ten or fifteen degrees warmer.

OE TEMPERATURE

These thermostats match the OEM-specified temperature rating for the vehicle. Manufacturers recommend an OE temperature thermostat for most engines, especially for:

  • Modern engines with computers that use the coolant temperature to help control the fuel, emissions and other important systems

ALTERNATE TEMPERATURE

These thermostats have a temperature rating below (cooler than) the OEM-specified temperature rating for the vehicle. This option may make sense for use in:

  • Modified Engines
  • Performance Applications
  • Older / Classic Vehicles
Cooling System Maintenance | Tips & Tools

Without regular maintenance, cooling system components will degrade and fail prematurely, which can lead to costly engine damage. Protect your engine with simple preventative maintenance:

  • Completely drain and flush the system using Cooling System Flush prior to installation. Flushing the system is critical to prevent system contamination and failure.
  • Consider replacing the Radiator Hoses (and Hose Clamps) and Radiator Cap as part of routine preventative maintenance. System contamination can cause these parts to degrade and fail over time, which can lead to severe engine damage from overheating.
  • Refill radiator with fresh Coolant / Antifreeze according to the volume and formula specified in your Owner's Manual. Inspect levels and condition every year.
OEM / Interchange Numbers: 12554784, 12555290, 12555811, 12559807

Warranty Information:
Limited Lifetime