STANDARD MOTOR PRODUCTS
STANDARD MOTOR PRODUCTS
More Information for STANDARD MOTOR PRODUCTS MAS0141
Continue Shopping
 
STANDARD MOTOR PRODUCTS MAS0141  
$47.79
Price
$0.00
Core
+ Sold in packs of 1x1
Pack
$47.79
Total
STANDARD MOTOR PRODUCTS MAS0141close
<
>
Part image
STANDARD MOTOR PRODUCTS MAS0141 Specifications
Attachment MethodBolt On
Connector GenderFemale
Connector Quantity1
Connector ShapeOval
Housing IncludedNo
MaterialMetal, Plastic
NotesSensor Only
Number of Bolt Holes2
Terminal GenderMale
Terminal Quantity5
Terminal TypeBlade
Standard® is the premier professional engine management brand in the automotive aftermarket today. Standard leads the way in advanced automotive technology with more than 40,000 products for complete vehicle coverage.

Features & Benefits:
  • 100% new, never remanufactured, so there's no leftover debris that can cause sensor failure
  • 100% computer-tested to ensure the ECU receives accurate airflow readings under hard engine conditions, which are required to balance and deliver the correct air/fuel ratio to the engine in order to achieve clean burns
  • Hybrid technology ensures reliable electronic circuitry
  • Lack of moving parts in sensor ensures wear-free sensor life
  • Manufactured to strict quality standards to ensure each part outperforms other air flow sensors in aftermarket

Check for Vacuum Leaks First!

Vacuum leaks present symptoms similar to a faulty MAF Sensor. When replacing the MAF, always check for vacuum leaks, too. Common sources include:

  • Cracked or loose Vacuum Hoses / Connectors - an audio Stethoscope can help detect air induced sounds from vacuum leaks.
  • Leaking Intake Manifold Gasket (found in the "Engine" category) - Vacuum Gauge readings below 17-22 in-Hg (normal manifold vacuum at sea level) at idle may indicate an intake manifold gasket leak.
    • Note: As elevation increases, readings decrease. Subtract 1 in-Hg from normal manifold vacuum reference for every 1,000 feet increase in elevation above 2,000 feet.
  • Stuck open PCV Valve - remove the PCV Valve and gently shake it; if it does not rattle, the valve is clogged or dirty and should be replaced.
  • Cracked Intake Boot (found in the "Engine" category)
Videos

Cleaning Your MAF Sensor

Standard Brand MAF Sensors

Additional Resources

Instruction Form GF11038A
RockAuto Newsletter: Maintaining the Optimal Air/Fuel Mixture
OEM / Interchange Numbers: 12576410, 15865791

Warranty Information:
36 Months / 36,000 Miles
Warranty Details